BIFMA X5.1 Office Chair Seat Forward Stability Test Chamber
BIFMA Furniture Testing Equipment Office Chair Seat Forward Stability Tester
Application
The Chair Stability Tester is used to perform the forwards overbalancing test.
Principle
Put the test-piece on the test table, blocked the front leg, apply specified force with forward 20N applied at seat loading point, check the article tends to oventurn forward or not to determine the test-piece forward stability performance.
Install the loading basket under the table which is lifting by Pneumatic actuator, max loading capacity up to 150kg, the lift of cylinder is controlled by pneumatic attenuation device, Load-bearing basket adopt rubber cushioning device to ensure that fall to final position will not produce damage, the operation unit of table can control loading basket to rise or go down, dynamical movement can position device adjustment, easy to operation.
Specification
| Seat surface loading: | Max: 600N, cumulative |
| Tensile force: | 20N |
| Loading point position: | seat surface center position,60mm from front edge |
| Seat surface loading pad: | diameter: 200mm |
| camber surface: | R300mm,9 pins |
| Loading rob: , | 19mm |
| both ends A type: | sphere SR19mm B type: sharp surface 45 ° |
| Weights basket lifting: | manual control |
| Dimensions (WxDxH): | 100x140x105cm |
| Weight: | 500kg |
| Air source: | 6kgf/cm2 stable air source |
| Standards: | ANSI/BIFMA X5.1-12.4 Front Stability;EN 1022, EN 1729-2 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.