AC Motor Automatic Sliding Gate Operator Wifi Mobile Mini App Control

Price Negotiable

Price: negotiable

MOQ: Sample order accepted

Delivery Time: 5-10 working days after payment received

Brand: SINOMATIC

Product Description

AC Motor Automatic Sliding Gate Operator with WiFi Mobile App Control

Residential 300kg AC Motor WiFi Mobile Mini App Control Automatic Slide Gate Opener

Main Functions & Features

Fully integrated electrical mechanical system (racks not included)
Control board interface for optional impact-proof infrared photocells
Compatible with flashing lights, keypads, electric locks, and other accessories
Automatic delayed closing function
Adjustable resistance sensitivity
Auto stop and reverse when obstacles are detected
Optional wireless or wired remote control
Easy installation and low maintenance requirements
Quick selection for gate open/close direction
Emergency release key for power failure situations
Soft start and soft stop operation
Pedestrian mode functionality
IP44 protection class rating
Dimensions: 24cm × 16cm × 27.3cm (L×W×H)
Remote control distance: 30-50m in open areas
Output gear module: M=4
Output gear number: Z=16

Technical Specifications

Model	PYM X2208
Power Supply	AC 220V±10%, 50Hz; AC 110V±10%, 60Hz
Max Loading Weight	300kg
Rated Power	130W
Gear Modulus	M=4
Open/Close Speed	12m/min
Electric Motor	220VAC/110VAC
Output Speed	50r/min±10%
Output Torque	12 N.m
Limit Switch	Magnet
Working Temperature	-20°C to +55°C

Standard Kit Includes

1 motor
2 remote controls
2 manual keys
1 built-in control panel
2 magnets
Installation screws
User manual

AC Motor Automatic Sliding Gate Operator components and installation diagram

Packaging Information

1 set per carton (32cm × 24cm × 30cm)
Weight: approximately 9kg per carton
40 cartons per cubic meter
1200 sets per 20-foot container

AC Motor Automatic Sliding Gate Operator packaging and shipping information

Installation Procedures

Important Note: Before motor installation, the sliding gate must be properly installed with hardware kit. If you require any gate hardware kit, please contact us.

The limit default setting is for gate in closed position. Before installation, ensure the gate is completely closed.
Prepare one or more conduits for electrical cables. Cable conduits must pass through the hole in the base plate.
Pour concrete and before it begins to harden, verify it is parallel to the gate leaf and perfectly level.
Set the four anchor bolts into the concrete during pouring. Ensure bolt positions align with mounting holes on the base plate before concrete hardens.
Place the opener onto the base plate. Verify it is perfectly parallel to the gate, then temporarily secure with the four supplied bolts and washers. Further adjustment will be required during rack installation.