Residential Automatic Slide Gate Opener Electric 130W Rated power

Price Negotiable

Price: negotiable

MOQ: Sample order accepted

Delivery Time: 5-10 working days after payment received

Brand: SINOMATIC

Product Description

Residential Automatic Slide Gate Opener Electric 130W Rated Power

Residential 300kg AC Motor with WiFi Mobile Mini App Control Automatic Slide Gate Opener

Main Functions & Features

Totally integrated electrical mechanical system (excludes racks)
Control board interface for optional impact-proof infrared photocells
Compatible with flashing lights, keypads, electric locks, and accessories
Automatic delayed closing function
Adjustable resistance sensitivity
Auto gate stop and re-open when obstacles are detected
Optional wireless or wired remote control
Easy installation and low maintenance requirements
Quick selection for gate open/close direction
Emergency release key for power failure situations
Stop/reverse function during obstruction events
Compatible with wide range of accessories
Soft start and soft stop operation
Pedestrian mode available
IP44 protection class rating
Dimensions: 24cm × 16cm × 27.3cm (L×W×H)
Remote control distance: 30-50m in open areas
Output gear module: M=4
Output gear number: Z=16

Technical Specifications

Model	PYM X2208
Power Supply	AC 220V±10%, 50Hz; AC 110V±10%, 60Hz
Max Loading Weight	300KG
Rated Power	130W
Gear Modulus	M=4
Open/Close Speed	12m/min
Electric Motor	220VAC/110VAC
Output Speed	50r/min±10%
Output Torque	12 N.m
Limit Switch	Magnet
Working Temperature	-20°C to +55°C

Additional Technical Details

Power supply: 220V±10%/50Hz, AC 110V±10%, 60Hz
Motor: 220V AC/110VAC
Absorbed motor power: 130W
Gate moving speed: 12m/min
Max gate weight: 300KGS
Environmental conditions: -25°C to +50°C

Product Image

Residential Automatic Slide Gate Opener Electric Motor Unit

Standard Kit Includes

1 motor
2 remote controls
2 manual keys
1 built-in control panel
2 magnets
Installation screws
1 user manual

Packing Information

1 set/carton (32cm×24cm×30cm), weight approximately 9 kg

40 cartons per cubic meter

1200 sets per 20' container

Installation Procedures

Note: Before motor installation, the sliding gate must be properly installed with hardware kit. If any gate hardware kit is required, please contact us.

The limit default setting is for gate in closed position. Before installation, ensure the gate is closed.
Prepare one or more conduits for electrical cables. Cable conduits must pass through the hole in the base plate.
Pour concrete and before it hardens, verify it is parallel to the gate leaf and perfectly level.
Set the four anchor bolts into the concrete when poured, ensuring proper positioning according to mounting holes on the base plate before concrete hardens.
Place the opener onto base plate. Check that it is perfectly parallel to the gate, then screw in the four supplied bolts and washers. This is temporary installation - further adjustment will be required when installing the rack.