IP54 Protection Grade Folding Barrier Gate with Fast Speed Servo Motor For Car Parking System
Price:
negotiable
MOQ:
Sample order accepted
Delivery Time:
5-10 working days after payment received
Brand:
SINOMATIC
Product Description
IP54 Protection Grade Folding Barrier Gate with Fast Speed Servo Motor
Advanced servo motor barrier gate designed for car parking systems, featuring integrated design and mold manufacturing with international leading technology.
Product Overview
This 2nd generation servo motor gate features compact structure, high precision, and standardization. It utilizes planetary reducer transmission for high efficiency, long life, no oil leakage, no blocking, and low noise. The motor employs 24V permanent magnet rare earth synchronous servo motor with small size, low power consumption, large torque, wide speed regulation, no heat generation, and precise limit control. Using digital signal processor (DSP) as the control core enables complex algorithms, network connectivity, and intelligent operation. The integrated drive circuit (IPM) detects faults and displays fault codes for quick problem resolution.
Technical Specifications
| Parameter | Model A | Model B |
|---|---|---|
| Cabinet Size | 298×340×928(mm) | 298×340×928(mm) |
| Working Temperature | -35℃ to +65℃ | -35℃ to +65℃ |
| Power Supply | AC110V/220V; DC24V | AC110V/220V; DC24V |
| Open/Close Speed | 0.9-8 Seconds (Adjustable) | 0.6-6 Seconds (Adjustable) |
| Rated Power | 200W | 400W |
| Driving Method | Servo Motor | Servo Motor |
| Humidity | ≤90% | ≤90% |
| Remote Control Distance | ≤100m (open, sunny weather) | ≤100m (open, sunny weather) |
| Protection Grade | IP54 | IP54 |
| Motor No-load Speed | 3000r/min | 3000r/min |
| Max Boom Length | 3m-6m | 2.5m |
Advanced Functions
- Adjustable operation speed and slow up/slow down settings
- Adjustable limit angle and quick left/right direction interchange
- Manual barrier arm operation during power failure
- 418 frequency learning code anti-copy remote controller
- Infrared photocell sensor I/O signal input function
- Loop detector and radar I/O signal anti-collision input
- Up, down and stop I/O signal input function
- Counting (fleet) function and LED light I/O signal output
- Traffic light I/O signal output function
- Up and down in place, normally open and closed signal output
- RS485 communication output function
- Delay arm drop and auto-reverse functions
- Automatic lifting function when power is off (requires additional power storage module)
- I/O port single-key cycle up and down function
- Loop detector normally open and normally closed function
- Anti-toll evasion function with one car per signal
- Anti-collision alarm function (requires additional alarm and sensor)
- Fire linkage signal input function
- I/O port closes signal input function
- 24V storage battery input function
Arm Direction Change Instructions
Servo motor can change arm direction LEFT or RIGHT through 6 process steps:
- Remove the original left side electronic control board bracket and install it to the right
- Remove the M8X20 hexagon socket screw that fixes the motor and lift out the motor
- Remove the fixing screw on the boom bracket
- Use M14X150 screws to pull out the boom bracket
- Install the extracted bracket from original left to right, or original right to left
- Install back to the case, fix M8X20 hexagon socket screws - left and right exchange completed with no additional settings required
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
Location
3F, Bldg B, No. 55 Langbei Vlg, Tongde Community, Baolong, Longgang, Shenzhen, 518116, China.
Contact Person
Manfrid Lee