Digital Signal Processor Controlled Automatic Barrier Gate For Complex Algorithms
Price:
negotiable
MOQ:
Sample order accepted
Delivery Time:
5-10 working days after payment received
Brand:
SINOMATIC
Product Description
Digital Signal Processor Controlled Automatic Barrier Gate
Product Overview
This second-generation servo motor gate features integrated design and mold manufacturing with international leading technology. The compact structure ensures high precision, consistency, and standardization. Utilizing planetary reducer transmission, it delivers high efficiency, long lifespan, no oil leakage, no blocking, and low noise operation.
The motor employs a 24V permanent magnet rare earth synchronous servo motor with small size, low power consumption, large torque, wide speed regulation, no heat generation, small penetration, and precise limit control. With a digital signal processor (DSP) as the control core, it enables complex algorithms, network connectivity, and intelligent operation. The integrated drive circuit (IPM) detects faults and displays fault codes for quick troubleshooting.
The three-bar linkage design ensures rapid rise and stable fall. Solar charging capability makes it suitable for unmanned applications including railway crossings, fire passages, oil stations, and mine tunnels without electricity requirements, enabling fully automatic operation control.
Key Functions & Features
- Adjustable operation speed
- Adjustable slow up and slow down
- Adjustable limit angle
- Quick left and right direction interchange
- Manual barrier arm operation during power failure
- 418 frequency learning code anti-copy remote controller
- Infrared photocell sensor I/O signal input
- Loop detector and radar I/O signal anti-collision input
- Up, down and stop I/O signal input
- Counting (fleet) function
- LED light I/O signal output
- Traffic light I/O signal output
- Up and down in place, normally open and normally closed signal output
- RS485 communication output
- Delay arm drop function
- Arm auto-reverse function
- Automatic lifting during power failure (requires additional power storage module)
- I/O port single-key cycle up and down function
- Loop detector normally open and normally closed function
- One car per signal anti-toll evasion function
- Anti-collision alarm function (requires additional alarm and sensor)
- Fire linkage signal input
- I/O port close signal input
- 24V storage battery input
Technical Specifications
| Parameter | Standard Model | Enhanced Model |
|---|---|---|
| Cabinet Size | 340×340×1047(mm) | 340×340×1047(mm) |
| Working Temperature | -35℃ to +65℃ | -35℃ to +65℃ |
| Power Supply | AC110V/220V; DC24V | AC110V/220V; DC24V |
| Open/Close Speed | 0.9Sec-8Sec (Adjustable) | 0.6Sec-6Sec (Adjustable) |
| Rated Power | 200W | 400W |
| Driving Method | Servo motor | Servo motor |
| Humidity | ≤90% | ≤90% |
| Remote Control Distance | ≤100m (open, sunny weather) | ≤100m (open, sunny weather) |
| Protection Grade | IP54 | IP54 |
| Motor No-load Speed | 3000r/min | 3000r/min |
| Max Boom Length | 3m-6m | 2.5m |
Arm Direction Change Instructions
Servo motor allows arm direction change (LEFT or RIGHT) in 6 process steps:
- Remove the original left side electronic control board bracket and install it to the right
- Remove the M8X20 hexagon socket screw that fixes the motor and lift out the motor
- Remove the fixing screw on the boom bracket (see Figure 1)
- Use M14X150 screws to pull out the boom bracket (as shown in Figure 2)
- Install the extracted bracket from original left to right, or original right to left
- Install back to the case, fix M8X20 hexagon socket screws - left and right exchange completed with no additional settings required
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
Location
3F, Bldg B, No. 55 Langbei Vlg, Tongde Community, Baolong, Longgang, Shenzhen, 518116, China.
Contact Person
Manfrid Lee