Fast Speed Parking Vehicle Boom Barrier Waterproof 304 Stainless Steel Housing Servo Motor
Price:
negotiable
MOQ:
Sample order accepted
Delivery Time:
5-10 working days after payment received
Brand:
SINOMATIC
Product Description
Fast Speed Parking Vehicle Boom Barrier
This patented 304 Stainless Steel series servo motor barrier gate combines permanent-magnet synchronous servo motor (PMSM motor) with high quality aluminum alloy press forming housing and well-designed gear reducer. The motor features high power density, low noise, minimal vibration, high efficiency, and fast response as a specialized drive application. Compared with traditional asynchronous motors, this servo motor offers higher efficiency, improved power factor, lighter weight, lower temperature rise, and better power-saving capabilities, which enhances power grid quality factor and maximizes current power grid capacity, thereby saving investment on power grid infrastructure. The motor drive employs servo motion control algorithm to accurately position open/close positions and motion curve tracks through encoder, making it suitable for expressway toll stations, bus stations, shopping malls, airports, hospitals, and various other applications.
Key Features
- Different boom lengths available (3 to 6 meters / maximum 8 meters)
- Can be customized with IP65 protection grade suitable for outdoor use
- Manual release (to be in up-position) in case of power turn-off/failure
- Includes main board cooling fan and double safety limit switches
- Supports internal and external vehicle loop detector
- Comes with 2 years warranty for the system and parts (optional)
Technical Specifications
| Specification | Standard Model | High-Speed Model |
|---|---|---|
| Cabinet size | 330*305*930(mm) | 330*305*930(mm) |
| Working Temperature | -35℃~+65℃ | -35℃~+65℃ |
| Power Supply | AC110V/220V; DC24V | AC110V/220V; DC24V |
| Open/Close Speed | 0.9Sec-8Sec (Adjustable) | 0.6Sec-3Sec (Adjustable) |
| Rated Power | 200W | 400W |
| Driving Method | Servo motor | Servo motor |
| Humidity | ≤90% | ≤90% |
| Remote Control Distance | ≤100m (open, sunny weather) | ≤100m (open, sunny weather) |
| Protection Grade | IP54 | IP54 |
| Motor No-load speed | 3000r/min | 3000r/min |
| Max Boom Length | 3m-6m | 2.5m |
Advanced Functions
- Operation speed can be adjusted
- Slow up and slow down can be adjusted
- The limit angle can be adjusted
- Left and right direction can be quickly interchanged
- The barrier arm can be manually operated in case of power failure
- 418 frequency learning code anti-copy remote controller
- Infrared photocell sensor I/O signal input function
- Loop detector and radar I/O signal anti-collision signal input function
- Up, down and stop I/O signal input function
- Counting (fleet) function
- LED light I/O signal output function
- Traffic light I/O signal output function
- Up and down in place, normally open and normally closed signal output function
- RS485 communication output function
- Delay arm drop function
- Arm auto-reverse function
- Automatic lifting function when power is off (requires additional power storage module)
- I/O port single-key cycle up and down function
- Loop detector normally open and normally closed function
- One car passes through each signal to prevent toll evasion function
- Anti-collision alarm function (requires additional alarm and sensor)
- Fire linkage signal input function
- The I/O port closes the signal input function
- 24V storage battery input function
Arm Direction Change Instructions
Servo motor can change arm direction LEFT or RIGHT through 6 process steps:
Step 1: Remove the original left side of the electronic control board bracket and install it to the right.
Step 2: Remove the M8X20 hexagon socket screw that fixes the motor and lift out the motor.
Step 3: Remove the fixing screw on the boom bracket.
Step 4: Use M14X150 screws to pull out the boom bracket.
Step 5: Install the extracted bracket from the original left to the right, or the original right to the left.
Step 6: Install back to the case, fix M8X20 hexagon socket screws, and the left and right exchanges are completed. No need to adjust other settings.
Step 1: Remove the original left side of the electronic control board bracket and install it to the right.
Step 2: Remove the M8X20 hexagon socket screw that fixes the motor and lift out the motor.
Step 3: Remove the fixing screw on the boom bracket.
Step 4: Use M14X150 screws to pull out the boom bracket.
Step 5: Install the extracted bracket from the original left to the right, or the original right to the left.
Step 6: Install back to the case, fix M8X20 hexagon socket screws, and the left and right exchanges are completed. No need to adjust other settings.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
Location
3F, Bldg B, No. 55 Langbei Vlg, Tongde Community, Baolong, Longgang, Shenzhen, 518116, China.
Contact Person
Manfrid Lee