Automatic Sliding Swing Garage Gate Operator Motor Safety Beam Sensors , Door Opener Infrared Photocell
Price:
negotiable
MOQ:
Sample order accepted
Delivery Time:
5-10 working days after payment received
Brand:
SINOMATIC
Product Description
Automatic Sliding Swing Garage Gate Operator Motor Safety Beam Sensors
Technical Specifications
| Parameter | Specification |
|---|---|
| Working Voltage | 24VDC |
| Working Current (24VDC) | Emitter: ≤8mA, Receiver: ≤30mA |
| Photocell Wavelength | 940nm |
| Angle of Opposite Emission | ≤±5° |
| Receiver Range | ≥12m |
| Internal Rotation System Adjusted Angle | ±90° |
| Working Temperature | -20℃ to +60℃ |
| Relay Contact Loading Capacity | 1A/30VDC |
| Size | 100×40×35mm |
Safety Instructions
- For security purposes, carefully read the user manual before initial operation
- This photocell does not include any fuse - ensure power is disconnected before installation
- Only use this system where it will not create life-threatening hazards or property damage during operation failure
- Ensure the product operates within its specified effective working range
Installation Instructions
Module Configuration
The receiver module J4 includes an option switch for NO (Normally Open) and NC (Normally Closed) photocell operation:
- When the short circuit cap is on NO position, the system operates as normally open
- When the short circuit cap is on NC position, the system operates as normally closed
Installation Guidelines
- Install photocells at least 20cm above ground level to prevent signal reflection
- Maintain a minimum distance of 50cm between emitter and receiver units
- Position photocells away from direct sunlight or other strong light sources (±5° tolerance)
- Avoid installing other infrared photocell emitters within the receiver's effective range
- For multiple photocell installations in a straight line, position receivers at both ends with emitters installed back-to-back
- Ensure stable mounting to prevent signal misalignment from vibration and malfunction
- For angled installations, adjust the PCBA for optimal alignment
Operation Verification
After installation and inspection, connect power and verify operation:
- With short circuit cap at NO: Emitter LED on, Receiver LED on, NO/NC contact ON
- When emitter and receiver are aligned: Receiver LED off, NC/NO contact OFF
- When sensor is obstructed: Receiver LED turns on, NO/NC contact activates
- With short circuit cap at NC: NO/NC states are opposite to the above conditions
For complete installation and operation details, please refer to the user manual:
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
Location
3F, Bldg B, No. 55 Langbei Vlg, Tongde Community, Baolong, Longgang, Shenzhen, 518116, China.
Contact Person
Manfrid Lee