24Ghz Digital Display FMCW Dual mmWave Barrier Gate Radar Detector with 0.5-6 Meters Detection and -40℃~+85℃ Range
- Width detection antenna electromagnetic distribution: detection width ≥ 1.5-2 meters
- Height detection antenna electromagnetic distribution: detection height ≥ 1.5-2 meters
- Precise electromagnetic wave crossing area coverage
| Parameter | Specification |
|---|---|
| Input voltage | 12VDC |
| Rated current | 250mA |
| Operating frequency range | 24-24.25GHz |
| Modulation mode | FMCW |
| X-axis antenna transmit power | 10-15dBm |
| X-axis horizontal beam | 35±5° |
| X-axis vertical beam | 15±3° |
| Y-axis antenna transmit power | 10-15dBm |
| Y-axis horizontal beam | 15±3° |
| Y-axis vertical beam | 35±5° |
| Detection distance | 0.5-6 meters, ±0.1 meters |
| Working temperature | -40℃~+85℃ |
| Shell size | 127*97*26mm |
Power Supply: Use a low-noise power adapter rated above 12VDC 1A for independent power supply. When connecting gate opening signals in barrier mode, connect radar power supply and gate controller power supply to the same ground (GND connected).
Controller Power: When using gate controller for power supply, ensure output voltage is 12V and output current is not less than 250mA.
Mounting Height: For small car parks, optimum height from radar center to ground is 50-60cm. For large car parks, height can be increased appropriately.
Pole Distance: Distance between radar center and fence pole: octagonal fence pole not less than 20cm, right-angle fence not less than 25cm.
Mounting Surface: Radar mounting surface should be perpendicular to horizontal plane and fixed securely.
Detection Area: Ground within detection range should be flat without obstacles. When angle between passing vehicle and radar is greater than 30 degrees, use road blocks to guide vehicle passage.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.