24GHz Barrier Gate Radar Detector with Anti-hit Protection and 0.5-6m Detection Range for Parking Access Control
Price:
US$45~US$55
MOQ:
Sample order accepted
Delivery Time:
3-7 working days
Brand:
SINOMATIC
Product Description
24GHz Millimetre Dual Wave Barrier Gate Radar Detector Sensor with Anti-hit Protection for Parking Access Control
The 24GHz Millimetre Dual Wave Barrier Gate Radar Detector Sensor eliminates complex wiring and environmental challenges in parking systems. Featuring anti-smash and trigger functions, this radar requires no ground cutting or complex wiring installation and operates reliably in all weather conditions. Installation and adjustment are simplified—simply set the detection distance after mounting to the barrier gate. All settings are visible via the LED digital display, and the radar includes both NO and NC ports.
Challenges with Traditional Loop Detectors
- Ground cutting requirements waste time and compromise aesthetics
- Complex wiring creates messy and difficult installations
- Mud roads prevent proper loop fixation
- Inability to detect high-bed vehicles like trucks and trailers
Advantages of Barrier Radar Detector
- Complete replacement for loop detectors with no wiring layout, saving time and cost
- Easy installation and parameter setting with adjustable distance from 1 to 6 meters
- Operates at 24-24.5GHz frequency range unaffected by climatic conditions
- Effectively distinguishes between vehicles and humans to prevent collisions
- Trigger detection capability for camera activation and picture capture
- Can trigger alarms in warning zones
- Traffic recording with data retention during power outages
Technical Parameters
| Parameter | Specification |
|---|---|
| Input voltage | 12VDC |
| Rated current | 250mA |
| Operating frequency range | 24-24.25GHz |
| Modulation mode | FMCW |
| X-axis antenna transmit power | 10-15dBm |
| X-axis horizontal beam | 35±5° |
| X-axis vertical beam | 15±3° |
| Y-axis antenna transmit power | 10-15dBm |
| Y-axis horizontal beam | 15±3° |
| Y-axis vertical beam | 35±5° |
| Detection distance | 0.5-6 meters, ±0.1 meters |
| Working temperature | -40℃~+85℃ |
| Shell size | 127*97*26mm |
Installation Specifications
- Power Supply: Use a low-noise power adapter rated above 12VDC 1A for independent power supply. When connecting gate opening signals in barrier mode, connect radar power supply and gate controller power supply to the same ground (GND connected).
- Controller Power: When using gate controller for power supply, ensure output voltage is 12V and output current is not less than 250mA.
- Mounting Height: For small car parks, optimum height from radar center to ground is 50-60cm. For large car parks, height can be increased appropriately.
- Pole Distance: Distance between radar center and fence pole: octagonal fence pole not less than 20cm, right-angle fence not less than 25cm.
- Mounting Surface: Radar mounting surface should be perpendicular to horizontal plane and fixed securely.
- Detection Area: Ground within detection range should be flat without obstacles. When angle between passing vehicle and radar is greater than 30 degrees, use road blocks to guide vehicle passage.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
Location
3F, Bldg B, No. 55 Langbei Vlg, Tongde Community, Baolong, Longgang, Shenzhen, 518116, China.
Contact Person
Manfrid Lee