AC Servo Motor Non-spring High Speed Automatic Barrier Gate with Auto-return Swing-away Flange
The DZ-138B automatic barrier gate is engineered for diverse applications including expressway toll stations, bus stations, shopping malls, airports, hospitals, and more. It incorporates third-generation servo motor technology with international leading integrated design, offering compact structure, high precision, and standardized performance.
In toll applications, collisions between vehicles and barrier booms occur frequently while maintaining permanent operational readiness. The optional auto-swing-away flange allows the barrier boom to automatically return to its original position, preventing damage to both boom and barrier while reducing downtime.
When a vehicle collision occurs, the barrier boom disengages, swings to the side, and is secured by a pivot shaft. Springs then return the barrier boom to its proper position in the flange, eliminating the need for manual re-engagement by staff.
A boom contact installed in the flange detects when the barrier boom has been deflected. After deflection, the flange slowly rotates to the open position, swinging the barrier boom completely out of the lane. The barrier resumes operation immediately or after an enable signal, depending on configured parameters.
| Product Dimensions | 292×368×940mm |
| Working Temperature | -35℃ to +65℃ |
| Power Supply | AC 100V-240V |
| Running Speed | 0.2s-8s |
| Rated Power | 750W |
| Driving Method | Servo Motor |
| Humidity | ≤90% |
| Remote Control Distance | ≤100m (open & sunny weather) |
| Protection Class | IP54 |
| Motor No-load Speed | 5000r/min |
| Adaptable Boom Length | 1.5m-2m; 3m |
- Adjustable operation speed
- Adjustable slow up and slow down
- Adjustable limit angle
- Quick left and right direction interchange
- Manual operation capability during power failure
- 418 frequency learning code anti-copy remote controller
- Infrared photocell sensor I/O signal input
- Loop detector and radar I/O signal anti-collision input
- Up, down and stop I/O signal input
- Counting (fleet) function
- LED light I/O signal output
- Traffic light I/O signal output
- Up and down in place, normally open and closed signal output
- RS485 communication output
- Delay arm drop function
- Arm auto-reverse function
- Automatic lifting during power failure (requires power storage module)
- I/O port single-key cycle up and down function
- Loop detector normally open and closed function
- One car per signal anti-toll evasion function
- Anti-collision alarm function (requires additional alarm and sensor)
- Fire linkage signal input
- I/O port close signal input
- 24V storage battery input
- Auto-swing-away flange option
24V voltage for traffic light use.
External infrared anti-radiation device with switch signal output connection.
Supports external ground sensors. Connect switch signal output from ground sensor.
Connect switch signal from the control system.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.