140W Automatic Parking Barrier with 6M Arm and IP44 Rating for Secure Parking Lot Gate Systems

Price Negotiable

Price: negotiable

MOQ: Sample order accepted

Delivery Time: 5-10 working days after payment received

Brand: SINOMATIC

Product Description

140W Automatic Parking Barrier System with Swing-Out Arm

Professional-grade automatic parking barrier system featuring a 140W motor and swing-out arm design for secure vehicle access control in parking facilities.

Technical Specifications

Working Temperature (Motor)	-35℃ to +85℃
Rated Voltage	DC24V
Running Speed	1.5s - 8s
Rated Current	8.58A
Rated Power	140W
No-load Speed	1850rpm
Rated Speed	1400rpm
Output Power	56.8N.m
Relative Humidity	≤90%
Remote Control Distance	≤100M (open area)
IP Rating	IP44
Maximum Arm Length	6M

Product Images

Automatic parking barrier system with swing-out arm in operational setting

Close-up view of parking barrier mechanism and control components

Key Features & Functions

Adjustable running speed from 1.5s to 8s
Quick interchange capability for maintenance
Manual barrier opening via motor wheel during power outage with automatic reset after power restoration
Curved crank arm three-link movement structure for stable operation
Wireless remote control for open/close functions
Auto reverse function with adjustable force
Infrared photocells connector compatibility
Loop detector connector availability
Seamless integration with car parking systems via wire control (switch signal required)
Traffic light connector support (AC220V, power less than 40W)
Dry contact signal output for parking systems (COM, NC, NO)
Adjustable auto-delay when closing
Built-in RS485 or CAN network communication interface (no additional module required)
Counting interface for traffic monitoring
24V backup battery interface with solar charging capability

Arm Length Speed Configuration Table

Menu Code	Range	Parameter Name	Default	Unit	Remarks
H00-00	25-95	Open speed adjustment	40		Corresponding PWM duty cycle 25%-95%, step size is 1
H00-01	25-95	Close speed adjustment	40		Corresponding PWM duty cycle 25%-95%, step size is 1
H00-02	5-40	Open in place decelerate angle	35		Larger angle reduces arm shaking when in place
H00-03	5-40	Close in place decelerate angle	35		Larger angle reduces arm shaking when in place
H00-04	1-20	Open accelerate adjustment	10	ms	Smaller number increases speed
H00-05	1-20	Close accelerate adjustment	10	ms	Smaller number increases speed
H00-06	1-30	Open in place angle	2	degree	Step size is 1
H00-07	1-30	Close in place angle	1	degree	Step size is 1
H00-08	7-13	Auto reverse force adjustment	10	A	Step size is 1
H00-09	0-90	Delay closing adjustment	0	Sec	Step size is 100; 0 disables auto-close, other values enable auto-close for non-loop detector scenarios
H00-10	10-50	Self-check speed adjustment	30		Corresponding PWM duty cycle 10%-50%, step size is 1
H00-11	0-2	Self-check mode	0		0: No auto operation; 1: Auto operation, reset after power off; 2: Auto operation, power failure memory
H00-12	0-5	Self-lock force adjustment (Invalid)	3
H00-13	1-20	Motor deceleration time when paused	5		Larger setting increases pause duration
H00-14	0-1	Default operation direction after self-test	0		0: Closing, 1: Opening
H00-15	1-10	Number of pole pairs (Invalid)	4		Only used for correct motor speed display
H00-16	1-32	RS485 communication address	1		Supports up to 32 slave devices
H00-17	0-2	RS485 communication rate	0		0: 9600, 1: 19200, 2: 38400; Requires power cycle to apply changes
H00-18	0-1	Self-test after power on	1		0: No self-test after power on, 1: Self-test after power on
H00-19	0-3	Manual self-test adjustment	2		0: Manual invalid, 1: Keyboard SET button, 2: Remote control valid, 3: Both keyboard and remote control valid
H00-20	0-15	Monitoring parameter setting index	7		7: Operation times; 8: Cumulative operation times; 9: Automatic operation times; 10: Collision times; 11: Closing in place times; 12: Power-on time; 13: Power-on times; 14: Input port status; 15: Error code
H00-21	0-3	Reset	0		1: Reset adjustment
H00-22	0-1	LED output mode	0		0: No alternating flash during operation; 1: Allow flashing