24V Vehicle Loop Detector with 100ms Reaction Time and 20 kHz to 170 kHz Frequency Range for Traffic Control
Price:
negotiable
MOQ:
Sample order accepted
Delivery Time:
2-5 working days after payment received
Brand:
SINOMATIC
Product Description
24V Car Parking Barrier Inductive Loop Traffic Detector
Vehicle Detector Loop Detector To Sense Vehicle Inspection Device Traffic Inductive Signal Control PD132
Product Introduction
The detector must be installed in a convenient weatherproof location as close to the loop as possible. Installation location must be away from heat sources and maintain at least 10mm distance from other devices. A correct loop configuration and detector installation will ensure a successful inductive loop detection system. Important loop parameters include loop figure, size, turns, and installation methods.
Operation and Indication
During detector tuning, the green Channel LED and red Power LED will turn on for approximately 2 seconds, then the green LED turns off. If a loop fault exists, the Channel LED will flash indicating a fault. The green channel LED glows whenever a vehicle is detected passing over the inductive loop. The red Power LED remains on to indicate that the unit is powered.
Technical Parameters
| Supply voltage | 230V AC, 115V AC, 24V DC/AC, 12V DC/AC |
| Voltage tolerance AC | +10% / -15% |
| Voltage tolerance DC | ±15% |
| Power Consumption | 4.5VA |
| Output relays | 240V/5A |
| Operating temperature | -20°C to +65°C |
| Storage temperature | -40°C to +85°C |
| Frequency range | 20 kHz to 170 kHz |
| Reaction time | 10ms |
| Signal holding time | Unlimited / limited when loop is permanently covered 10 minutes |
| Sensitivity | Adjustable in 4 increments |
| Loop inductance | Total loop plus connection wiring: 50μH to 1000μH. Ideal is 100μH to 300μH |
| Loop connection wiring | Maximum length 20 meters, twisted at least 20 times per meter |
| Size of Housing | 78x40x108 mm (L x W x H) |
Main Features
- Reset Switch: Enables manual reset during commissioning and testing, allowing the detector to re-tune the sensing loop
- Selectable Pulse Time: Sets pulse relay energization time to 1 Second or 0.5 Seconds
- Pulse Relay Selection: Configurable to energize on vehicle detection or when vehicle leaves the loop
- Sensitivity Boost: Sets undetect level to maximum sensitivity to prevent loss of detection of high-bed vehicles
- Switch Selectable Sensibility: 4 sensitivity settings for flexible configuration
- Switch Selectable Frequency: 4 frequency settings to prevent cross-talk between adjacent loops
- Filter Option: Provides delay between vehicle detection and output relay switching to prevent false detection
- Permanent Presence Option: Ensures maintained vehicle detection when parked over the loop for extended periods
Product Images
Shipping Information
- Ensure complete contact information including contact person, address, post code and telephone number
- Typically ships within 24-72 hours after payment confirmation (excluding holidays)
- Shipping options: China Post, HK Post, EMS, DHL, FedEx (select during order placement)
- Contact us if item not received within 15 days
- Not responsible for customs delays, import duties, taxes or other customs charges
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
Location
3F, Bldg B, No. 55 Langbei Vlg, Tongde Community, Baolong, Longgang, Shenzhen, 518116, China.
Contact Person
Manfrid Lee