PD132 170kHz 200m Length Sensitivity Adjustable Vehicle Loop Detector for Traffic Control Systems
Price:
negotiable
MOQ:
Sample order accepted
Delivery Time:
2-5 working days after payment received
Brand:
SINOMATIC
Product Description
PD132 24V 170kHz 5W 200m Length Sensitivity Adjustable Vehicle Loop Detector
Detection to Stop Function Vehicle PD132 Loop Detector 24V for Smart Parking System
Key Selling Points
- Two-way output relays
- Lightning and surge protection
- Two high intensity LED indicators
- 4 grades sensitivity adjustable - select the optimal sensitivity level
- 4 frequency settings prevent crosstalk in multi-loop applications
- Large loop inductance range from 50μH to 1000μH
Functions & Features
- Reset Switch
- Filter Option
- Pulse output or permanent output adjustable
- Frequency adjustable in 4 increments
- Sensitivity adjustable in 8 increments
Applications
- Counting vehicles
- Parking guidance system
- Automatic door
- Gate drive mechanisms
- Operating barriers
- Activating card dispensers in parking lots
- Traffic Light System
Technical Parameters
| Net Weight | 300g |
| Dimensions | 78x40x108 mm (L x W x H) |
| Storage temperature | -40°C to +85°C |
| Operating temperature | -40°C to +82°C |
| Autocorrecting time | 1 to 2 seconds |
| Loop connection wiring | Maximum length 200 meters, twisted at least 20 times per meter |
| Wiring | Max 50μH to 1000μH (include connecting wiring) Ideal 100μH to 300μH |
| Sensitivity | Adjustable in 4 increments |
| Signal holding time | Unlimited / limited when loop is permanently covered 10 minutes |
| Operating voltage | 220v, 110vAC 24v,12vDC |
| Power Consumption | <5W |
| Output relays | 240V/5A AC |
| Frequency range | 20 kHz to 170 kHz |
| Reaction time | 10ms |
Main Features
- Reset Switch: Enables manual reset during commissioning and testing, re-tuning the sensing loop for vehicle detection
- Selectable Pulse Time: Sets pulse relay energization time for 1 Second or 0.5 Seconds
- Pulse Relay Selection: Configurable to energize on vehicle detection or departure
- Sensitivity Boost: Sets undetect level to maximum sensitivity to prevent loss of high-bed vehicle detection
- Switch Selectable Sensibility: 4 sensitivity settings for flexible configuration
- Switch Selectable Frequency: 4 frequency settings to prevent cross-talk between adjacent loops
- Filter Option: Provides delay between vehicle detection and output relay switching to prevent false detection
- Permanent Presence Option: Ensures continuous vehicle detection during extended parking periods
Product Images
Detailed Views
Operation and Indication
During detector tuning, both green Channel LED and red Power LED illuminate for approximately 2 seconds, after which the green LED turns off. A flashing Channel LED indicates a loop fault. The green channel LED illuminates when a vehicle is detected passing over the inductive loop. The red Power LED remains on to indicate unit power status.
Frequency Adjustment
Frequency can be altered to eliminate interference between neighboring wire loops or loop detectors.
Sensitivity Control
Sensitivity allows selective detection based on inductance change. Four sensitivity selections are available via DIP3 and DIP4 switches.
Automatic Sensitivity Boost
Selected by DIP5 switch: OFF - Disabled, ON - Enabled. Boosts sensitivity to maximum during vehicle detection and maintains this level while vehicle is present over the loop. Returns to pre-selected level after vehicle departure.
Wiring Diagram
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
Location
3F, Bldg B, No. 55 Langbei Vlg, Tongde Community, Baolong, Longgang, Shenzhen, 518116, China.
Contact Person
Manfrid Lee