Adjustable Increments Vehicle Loop Detector 170kHz 10ms For Drop Barrier
Price:
negotiable
MOQ:
Sample order accepted
Delivery Time:
2-5 working days after payment received
Brand:
SINOMATIC
Product Description
Adjustable Increments Vehicle Loop Detector 170kHz 10ms For Drop Barrier
Single Channel 110V Drop Arm Barrier Gate Vehicle Loop Detector Parking Control System
Technical Specifications
| Supply voltage | 230VAC, 115V AC, 12V DC, 24V DC (See the label on the detector) |
| Voltage tolerance AC | +10% / -15% |
| Voltage tolerance DC | ±15% |
| Power Consumption | 4.5VA |
| Output relays | 240V/5A |
| Operating temperature | -20°C to +65°C |
| Storage temperature | -40°C to +85°C |
| Frequency range | 20kHz to 170kHz |
| Reaction time | 10ms |
| Signal holding time | Unlimited / limited when loop is permanently covered 10 minutes |
| Sensitivity | Adjustable in 4 increments |
| Loop inductance | Total loop plus connection wiring: 50μH to 1000μH. Ideal is 100μH to 300μH |
| Loop connection wiring | Maximum length 20 meters, twisted at least 20 times per meter |
| Size of Housing | 78x40x108 mm (L x W x H) |
Product Applications
- Automatic Gate
- Traffic Light System
- Gate Drive Mechanisms
- Operating Barriers
- Parking Guidance System
- Activating Card Dispensers in Parking Lots
Main Features
- Industrial engineering design concept
- Standard industrial guide installation
- Strong anti-jamming ability and stability
- Variety of output interface adapted to different scenes
- Variety of shape choices to meet differentiation demands
- High temperature stability
- Environment drift automatic compensation function
- Coil automatic fault detection function
- Self-detection when DIP switch is on position or changing presence output time
- ABS align to the pillar for compact combination
- Adjustable presence output time
- Work mode can be set by DIP switch
- Pulse output or permanent output can be adjustable
Product Installation
The detector must be installed in a convenient weatherproof location as close to the loop as possible. Installation location must choose to stay away from heat sources, and maintain a distance of at least 10mm from other devices (must not fix cling to the cabinet). A correct loop configuration and detector installation will ensure a successful inductive loop detection system. Loop parameters include: loop figure, size, turns, and installation methods.
Work Indicator
Detector enters self-calibration condition with green LED flash and red LED extinguish once powered on. This process lasts 1 second. Vehicles should not be on the loops during self-calibration. After self-calibration, green LED will not flash and red LED remains extinguished. When a vehicle passes over the loop, the red LED turns on.
Operation and Indication
While the detector is tuning, both green Channel LED and red Power LED turn on for about 2 seconds, then green LED turns off. If a loop fault exists, the Channel LED flashes indicating a fault. If the fault self-heals, the detector continues operating. The green channel LED glows when a vehicle is detected passing over the inductive loop. The red Power LED remains on to indicate unit is powered.
Frequency
To eliminate interference of two neighboring wire loops or loop detectors, the frequency can be altered.
Sensitivity
The sensitivity allows the detector to be selective regarding the change of inductance necessary to produce an output. There are four sensitivity selections set by DIP3 and DIP4 Switch.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
Location
3F, Bldg B, No. 55 Langbei Vlg, Tongde Community, Baolong, Longgang, Shenzhen, 518116, China.
Contact Person
Manfrid Lee