Screw Piston Swing Gate Operator Worm Gear DC24V Double Arm 140W
| Model | PK300DC |
| Driving Method | Screw driven piston type |
| Motor Power | DC 24V, 140W |
| Operating Cycle | 20 second per 90° (approx) |
| Max. Single-leaf Weight | 300KG |
| Max. Single-leaf Length | 2.5M |
| Gear Box | Worm gear |
| Limit Switch | Stop block |
| Working Temperature | -20℃~70℃ |
| Work Duty | S2 30min |
| Power Supply | AC 110V/220V, 60Hz/50Hz |
| Protection Class | IP 54 |
| Weight | 16KG |
| Standard Configuration | 2 motor, 1 control box with board, 2 remote transmitters, 1 release bar |
| Optional Accessories | Photocell, alarm wall lamp(20V/220V/110V), wireless keypad, wireless wall button, 20W solar panel, 9AH battery box with solar charger |
- Push rod 24V DC electronic swing arm gate opener
- Soft start slow stop function
- Obstacle detection in opening and closing
- Automatic close function with adjustable timing
- Over-current protection meeting European safety requirements
- Safe design to prevent PCB damage from incorrect wiring
- Compatible with GSM, solar system, photocell, alarm lamp, and electronic lock
- Supports up to 23 additional remote controls
- Manual release capability for power outages and emergencies
- Optional accessories: alarm wall lamp, photocell, wireless keypad, wireless wall button, 20W solar panel, 9Ah battery box with solar charger
The PK300DC/PK350DC swing gate opener is designed for single leaf gates weighing less than 300kg, with a maximum single leaf length of 2.5m/3m. The drive mechanism combines worm gear with screw rod transmission. This gate opener must be installed inside the enclosure or yard for protection.
a) Before installing the door opener, confirm proper gate installation to ensure smooth manual operation and effective safety stopper functionality.
b) For electric lock installation, maintain 40-50mm clearance between gate bottom and ground. Without electric lock, maintain ≥20mm clearance.
c) Recommended mounting height is 300-800mm from ground, with reliable fixed points for mounting brackets.
Use PVC pipes to lay motor, power, and control cables separately. Use two separate PVC pipes for motor/power cables and control cables respectively.
For secure installation of PK300DC/PK350DC main engines, use expansion screws to fix the mounting brackets.
For more detailed information, please refer to the attached user manual.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.