Blufloc A-3515 Anionic Polyacrylamide Polymer - 20-100 Mesh, 89% Solid Content for Water Treatment
Blufloc A-3515 is an anionic polyacrylamide homopolymer with medium molecular weight and charge degree. This water-soluble polymer is widely used in water treatment, industrial processes, and environmental applications for flocculation, sedimentation, and viscosity enhancement.
| Parameter | Specification |
|---|---|
| Appearance | Off-White Granular Powder |
| Ionic Charge | Anionic |
| Particle Size | 20-100 mesh |
| Molecular Weight | Low to Medium |
| Solid Content | 89% Min |
| Bulk Density | 0.6-0.8 |
| Specific Gravity at 25°C | 1.01-1.1 |
| Working Concentration | 0.1-0.5% |
| PH (1% aqua solution) | 6-9 |
| Storage Temperature | 0-35°C |
| Shelf Life | 2 years |
| Concentration | Brookfield Viscosity at 25°C |
|---|---|
| 1.0% | >1200 |
| 0.50% | >500 |
| 0.25% | >300 |
- Raw Water Treatment: Flocculant for sedimentation, thickening and suspended solids removal
- Sewage Water Treatment: Water purification chemical for industrial wastewater treatment
- Coal Mine Washing: Centrifugal separation and filtration of coal powder and coal mud
- Paper-making Industry: Fixing agent, residency agent, filtration aid and reinforcing agent
- Sand Prevention & Solidification: Desert spraying for sand prevention and solidification
- Textile Industry: Sizing agent for improved adhesive properties and electrostatic prevention
- Soil Humectants: Water preservation and sand solidification for slope grass planting
- Chemical Mudding Agent: Plugging water for dikes, ground foundation and channels
- Sugar and Juice Mills: Flocculation, sedimentation, clarification and floatation
Typical dosage ranges from 0.2-3.0 ppm depending on effluent type and application. Jar testing is recommended for optimal performance evaluation.
- Dissolving Time: Approximately 1 hour with continuous agitation
- Agitation Speed: 200-400 rpm recommended
- Dissolving Concentration: 0.1-0.5% standard concentration
Wear appropriate personal protective equipment including splash goggles, lab coat, vapor respirator, gloves and boots. In case of skin contact, wash immediately with plenty of water. For eye contact, flush with fresh water and seek medical attention.
- 25kg Kraft or PE bags with inner plastic lining
- 750kg net big bags available
- Store in original packaging in cool, dry place away from heat and direct sunlight
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.