ADT6501SRJZP085RL7 85°C Thermal Switch ±1°C Accuracy 2.7V-5.5V SOT-23-5 10μA Low Power AEC-Q100

ADT6501SRJZP085RL7

andnbsp;

FEATURES

andplusmn;0.5anddeg;C (typical) threshold accuracy

Factory-set trip points from

andminus;45anddeg;C to +15anddeg;C in 10anddeg;C increments

+35anddeg;C to +115anddeg;C in 10anddeg;C increments

No external components required

Maximum temperature of 125anddeg;C

Open-drain output (ADT6501/ADT6503)

Push-pull output (ADT6502/ADT6504)

Pin-selectable hysteresis of 2anddeg;C and 10anddeg;C

Supply current of 30 andmicro;A (typical)

Space-saving, 5-lead SOT-23 package

APPLICATIONS

Medical equipment

Automotive

Cell phones

Hard disk drives

Personal computers

Electronic test equipment

Domestic appliances

Process control

andnbsp;

GENERAL DESCRIPTION

The ADT6501/ADT6502/ADT6503/ADT6504 are trip point temperature switches available in a 5-lead SOT-23 package. Each part contains an internal band gap temperature sensor for local temperature sensing. When the temperature crosses the trip point setting, the logic output is activated. The ADT6501/ ADT6503 logic output is active low and open-drain. The ADT6502/ADT6504 logic output is active high and push-pull. The temperature is digitized to a resolution of 0.125anddeg;C (11-bit). The factory trip point settings are 10anddeg;C apart starting from andminus;45anddeg;C to +15anddeg;C for the cold threshold models and from +35anddeg;C to +115anddeg;C for the hot threshold models. These devices require no external components and typically consume 30 andmu;A supply current. Hysteresis is pin-selectable at 2anddeg;C and 10anddeg;C. The temperature switch is specified to operate over the supply range of 2.7 V to 5.5 V. The ADT6501 and ADT6502 are used for monitoring temperatures from +35anddeg;C to +115anddeg;C only. Therefore, the logic output pin becomes active when the temperature goes higher than the selected trip point temperature.

The ADT6503 and ADT6504 are used for monitoring tempera tures from andminus;45anddeg;C to +15anddeg;C only. Therefore, the logic output pin becomes active when the temperature goes lower than the selected trip point temperature.

andnbsp;

Information

andnbsp;

Drawing

Our advantage :

• High quality products --- our offers are 100% new and original, ROHS
• Competitive price --- good Purchase channels with good price.
• Professional service --- strict quality testing before the shipment, and perfect after-sales service after the purchase.
• Adequate inventory --- With the support of our strong Purchasing team,
• Fast delivery --- we will ship the goods within 1-3 working days after the payment confirmed.

andnbsp;

be sure to meet your need for all kinds of components. ^_^


Product List
Supply a Series of Electronic Components, full range of semiconductors, active andamp; passive Components.We can help you to get all for bom of the PCB,IN a word, you can get one-stop solution here,


The offers including:
Integrated Circuit, Memory ICs, Diode, Transistor , Capacitor, Resistor, Varistor, Fuse, Trimmer andamp; Potentiometer, Transformer, Battery, Cable, Relay, Switch, Connector, Terminal Block, Crystal andamp; Oscillator, Inductor, Sensor, Transformer, IGBT Driver, LED,LCD, Convertor, PCB (Printed Circuit Board),PCBA (PCB Assembly)

Strong in Brand:
Microchip, MAX, AD, TI, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc