Gcr15 Roll Material Metal Door Shutter Door Frame CE Certificate Cold Roll Former
Gcr15 Roll Material Metal Door Shutter Door Frame CE Certificate Cold Roll Former
Product Description
Main parameter:
| No. | main parameter of roll forming machine | |
| 1 | Suitable to process | Color steel plate |
| 2 | Width of the plate | 165mm |
| 3 | Rollers | 10rows |
| 4 | Dimensions | 3.5*1.45*1.51m |
| 5 | Power | 3kw |
| 6 | Thickness of the plate | 0.3-0.6mm |
| 7 | Productivity | 8-10m/min |
| 8 | Diameter of the roller | Φ38mm |
| 9 | Weight | About 1.5T |
| 10 | Voltage | 380V 50Hz 3phases |
| 11 | Material of the cutting plate | Cr12 |
| 12 | Hydraulic | 40# |
| 13 | Processing precision | Within 1.00mm |
| 14 | Control system |
PLC control |
Working Flow:
manual uncoiler - roll forming machine - computer control system - hydraulic control system - cutting system - output table
Components and Technical Specification
1. Manual Uncoiler
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:5T
Inner diameter: 500-508mm
2. Feeding Table
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
3. Hydraulic System
Power:4kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
4.Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
PLC:EURA
5.Cutting System:
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
6.Output Table
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.
1. Installation and training of rolling machine:
a.If buyers visit our factory and check the machine, we will teach you how to install and use the roll forming machine for sale , and also train your workers/technician face to face.
b.Without visiting, we will send you user manual and video to teach you to install and operate.
c.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
2. After Service of rolling machine
a.One year guarantee for whole roll forming machine for sale.
b.24 hours technical support by email or calling
c.If there is any problem found of rolling machine , we will repair roll forming machine for sale for free in one year.
Un-coiler System of shutter door roll forming machine
Usage: It is used to support the steel coil and uncoil it in a turntable way.
Passive uncoil pulled by roll forming system
| Loading capacity | Uncoiling width | Inner diameter |
| 1.5T | 300mm | 450-550mm |
Coil feeding part of shutter door roll forming machine
Usage: Put the raw material(steel plate) through the beach to manufacture and process,it can guarantee that the products are neat, parallel and everything is uniformity.Please refer to the equipment regulation to knowthe function of
locate angle iron.
Forming device of shutter door roll forming machine
Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission,roller was chromed which can keep the molding plate surface smooth and not easy to be marked
when it is working
Feature : Ensure stability , precision and lifetime.
| No. | Main parameter of shutter door roll forming machine | |
| 1 | Length of the main part | 3300*800*1400mm |
| 2 | Weight of main part | 3.2 t |
| 3 | Voltage | 380V/50HZ3Phase (as customer’s request) |
| 4 | Roller fixer | Guide column |
| 5 | Frame |
Middle plate welded |
| 6 | Frame thickness | 25mm |
| 7 | Drive mode | Gear or chain |
| 8 | Material of rollers | Gcr15 |
| 9 | Material of shafts | 45# steel with tempering |
| 10 | Diameter of shafts | φ40mm |
| 11 | Number of rollers | 10 rollers |
| 14 | Main power | 4kw (Cycloidal planetary gear speed reducer) |
Cutting device of shutter door roll forming machine
Advanced hydraulic drive, automatic punching and cutting after forming, no distorting or wasting, high level safety factor.
| Blade Material | Cutting system |
| Cr12 steel with quenched treated 60-62°C | Full automatic |
Controlling device of rolling machine
| Screen | PLC | Coder |
| Text screen displayer | Taida DVP14ES from Taiwan | ENC-1-1-1T-24 from South Korea |
Hydraulic of rolling machine
| Orgin | Power |
| Advanced hydraulic system from Taiwan | 5.5kw |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.