Smooth Insertion Cartridge Heater With Crimped Cable And Built-in Thermocouple
Product Overview
High-density cartridge heater integrated with a built-in Type K thermocouple for precise, real-time temperature monitoring. Featuring an internally crimped lead exit design, the fiberglass cable stays completely flush with the heater sheath, enabling full-length, smooth insertion into tight mold bore holes without binding or interference.
Key Features
-
Smooth Mold Insertion: Internally crimped cable design ensures zero outer bulge, allowing seamless, full-depth insertion into mold holes.
-
Integrated Sensing: Built-in Type K thermocouple saves space and eliminates the need for a separate temperature probe.
-
Internal Connection: Thermocouple junction is wired internally inside the sheath for a clean, compact lead exit.
-
Vibration & Strain Relief: Deep-crimped lead entry provides strong mechanical protection against wire pull and flexing damage.
Technical Details
| 1 | Inside magnesium oxide insulation material: | 99.99% high purity magnesium oxide |
| 2 | Heating element: | high durance and high temperature NiCr2080 heating elements from Germany |
| 3 | TC material: | High quality TC elements to ensure ±5 ℃ tolerance |
| 4 | Max working temperature | 1100℃ |
| 5 | High voltage stability test: | Less than 0.5mA leak under 1000V for 30 seconds |
| 6 | OD range: | 2mm-50mm |
| 7 | The range of the Total Length: | 25mm----2500mm |
| 8 | Maximum power density: | 60w/cm² |
| 9 | Unheated zone: | 10mm at lead end and about 5mm at bottom |
| 10 | Lead options: | A: Solid Nickel Pin: wire 300℃ or 500℃ B: Swaged in wire: 500℃ wire coming from inside |
Custom Specifications Available: Whether you need specific imperial/metric diameters, custom wattages, or specialized length configurations, our technical team can customize the perfect thermal solution for your machinery.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.