Customized Injection Molding Hot Runner Electric Heating Coils With CE Certified
Hot Runner Electric Heates Coil in Straight Dual End
1. Electric Heates Coil Brief Introduction
Wuhan Global Metal hot runner Electric Heate Coil use Germany heater wire, United States high-purity magnesium oxide material, and strict process technology. There are various cross section and size for choice, such as square, round and flat, provide high-performance electric heater for heating hot runner mold and other fields.
Heater maximum temperature up to 650 ºC, the integration of temperature thermocouple for the precise temperature control, can provide K, J, E thermocouple, blasting and blackening surface treatment, also can provide bright surface.
2. Copper Heaters Coil Characteristics
- Standard sizes available with various cross section
- Various Watt Density options available.
- Robust Design with Choice of Terminal Exits
- Designed for even heat profile
- Precision fit on Hot Runner Nozzles & Manifolds
- Highly Non-corrosive
- Maximum heat transfer due to more contact area
- Advanced Thermal Engineering
- CE Certified
- Available with built in Thermocouple
3. Copper Heaters Coil Parameter.
- Standard Configuration
- Sleeve Material :copper
- Unheated length(L1):45mm
- Connector(cold side)(D1xU): Ф7.6x26
- Power lines,grounding wire length(L):1000mm
- Jacket: Silicone fiberglass sheathing establishment, black and others
- Thermocouple: J type
- Compensating lead wire length (L): 1000mm
- Surface treatment: sandblasting;black ,polish
|
Spring coil heater (H series) |
3.2x1.8 |
Φ1.8 |
Φ2.5 |
4.2x2.2 |
|
Voltage |
220V,230V,240V |
|||
|
Power tolerance 115W-200W |
+/-10% |
|||
|
Power tolerance 201W-2000W |
+5%-10% |
|||
|
Out jacket length |
30mm~280mm |
|||
|
inside jacket diameter |
10mm~42mm |
|||
|
Unheating length |
45mm |
|||
|
Max power density |
9W/cm² |
|||
|
Heating Length tolerance |
+/-0.05mm |
|||
|
Unheating length tolerance |
+/-2.5% |
|||
|
Tolerance ID d ≤20mm |
0.05mm~0.10mm |
|||
|
Tolerance cross section |
+/-0.10mm |
+/-0.15mm |
||
|
Thermocouple |
K,J,E |
None |
K,J,E |
|
|
Material |
304,321,316 |
|||
|
Maximum working temperature |
650℃ |
|||
|
Die electrical strength |
600V |
800V |
||
5. Packing Information
6. Transportation
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.