Thermocouple Components Steatite Ceramic Insulator for Band Heater
Steatite Ceramic Insulator for Band Heater
1. Brief Introduction
Steatite is lower in cost than Alumina but offers reduced mechanical properties. However Steatite has very good electrical resistance properties, which are retained at high temperatures, along with moderate mechanical strength and temperature resistance. It has been used in electrical insulation for many years in both large-scale electrical systems and electronic and domestic appliances.
2. Characteristics
1. High resistivity
2. Moderate strength
3. Excellent electrical properties
4. Poor heat conductivity (Thermal insulator).
5. Good resistance to thermal shock.
6. Low coefficient of thermal expansion.
7. Good mechanical stability.
3. Parameter.
| Item | Testing condition | Unit | Steatite |
| Bulk density | g/cm3 | ≥2.6 | |
| Flexural Strength | N/m2×103 | 1.37 | |
| Coefficient of linear expansion | 20~800°C | ×10-6/°C | ≤8 |
| Permittivity | 1MHz | ≤7.5 | |
| 10GHz | / | ||
| Insertion loss | 1MHz | ×10-6 | ≤8.0 |
| 10GHz | ×10-6 | / | |
| Bulk density resistance | 100°C | Ω·Cm | >1012 |
| Puncture strength | KV/mm | 20 | |
| Thermal conductivity | 20°C | W/m·k | 2.9 |
Applications:
- Heating element holders
- Stand off Insulators
- Interlocking Insulating Beads
- Splitbush insulators
- Lamp bases and caps
- Regulator parts
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.