Height 31MM Coil Heater With Stainless Steel Armor Outside And Type J Thermocouple
Height 31MM Coil Heater With Stainless Steel Armor Outside And Type J Thermocouple
1. Electric Resistance Heater Brief Introduction
2. Electric Resistance Heater Characteristics
- Standard sizes available with various cross section
- Various Watt Density options available.
- Robust Design with Choice of Terminal Exits
- Designed for even heat profile
- Precision fit on Hot Runner Nozzles & Manifolds
- Highly Non-corrosive
- Maximum heat transfer due to more contact area
- Advanced Thermal Engineering
- CE Certified
- Available with built in Thermocouple
3. Electric Resistance Heater Application
- Hot Runner Nozzles & Bushings.
- Hot runner Injection moulds
- Injection & Blow Moulding Machine Nozzles.
- PET prefrom & Thin wall container Moulds.
- Hot Runner Manifolds.
4. Electric Resistance Heater Parameter.
Standard Configuration
Material :304
Unheated length(L1):45mm
Connector(cold side)(D1xU): Ф3.5x40mm
Power lines,grounding wire length(L):1000mm
Surface treatment:sandblasting;
|
Spring coil heater (H series) |
2.2x1.5, 2.4x1.6, Φ1.8,Φ2.0,Φ2.5 |
|
Voltage |
220V,230V,240V |
|
Power tolerance 115W-200W |
+/-10% |
|
Power tolerance 201W-2000W |
+5%-10% |
|
Out jacket length |
30mm~190mm |
|
Diameter of the inner sleeve/wrapped diameter |
10mm~42mm |
|
Unheating length |
45mm |
|
Max power density |
9W/cm² |
|
Heating Length tolerance |
+/-0.05mm |
|
Unheating length tolerance |
+/-2.5% |
|
Tolerance ID d ≤20mm |
Without inner sleeve:-0.15mm |
|
Tolerance ID d 20mm~30mm |
Without inner sleeve:-0.20mm |
|
Tolerance ID d ≥30mm |
Without inner sleeve:-0.25mm |
|
Tolerance cross section |
+/-0.10mm |
|
Thermocouple |
None |
|
Material |
304,321,316 |
|
Maximum working temperature |
650℃ |
|
Die electrical strength |
600V |
5. Packing Information
6. Transportation
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.