Hot Runner Tubular Heater Manifolds Flexible Heater Chrome Nickel Steel
Hot Runner Tubular Heater Manifolds Flexible Heater Chrome Nickel Steel
The Manifold heater is supplied in Chrome Nickel Steel with nominal sheath diameter of 6.50mm and 8.00mm. Standard elements have a terminal post which gives a cold section of approx 30mm for 6.50mm and 35mm for 8.00mm.For manufacturing formed elements it is necessary to have an accurate dimensional sketch showing all the centre distances, radius and degrees.
Features for Manifold heater:
1. Available in Chrome Nickel Steel
2. Sealed Edges to prevent from Moisture
3. Superior Grade Magnesium Oxide Insulation
4. Swaged for Good Electrical Insulation & Heat Transfer
5. Available in Dia 8.5 mm, 8 mm,6.5 mm & square section,6 mm x 6 mm
Technical Data for manifold heater:
| Length | 300-1550mm | 400-2100mm |
| Max Current | 12A | 15A |
| Nominal Voltage | Less than 230V | Less than 400V |
| Wattage | ±10% | ±10% |
| Dielectric Strength | 1.5HV | 1.5HV |
| Insulation MΩ | More than 5 MΩ | More than 5 MΩ |
| More than 5 MΩ | Less than 0.5 mA | Less than 0.5 mA |
| Minimum Unheated | 30mm | 35mm |
| Terminal Pins | M3 x .50mm / plain post | M4 x .70mm |
hot runner manifold tubular heater precision-formed and customized to your hot runner mold application.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.