Light Weight EPS Wall Panel Fiber Cement Board Production Line High Automatization Degree
Price:
30000USD
MOQ:
10 sets
Delivery Time:
30 days
Brand:
chuangxin
Product Description
Light Weight EPS Wall Panel Fiber Cement Board Production Line High Automatization Degree
Automatic Fiber Cement Board Light Weight EPS Wall Panel Production Line
Product Description
Light weight EPS wall panel machine/sandwich wall panel machine
1. High strength
2. Simple, fast and firm installation
3. Easy cutting, drilling and sawing
4. Can be decorated directly
5. Competitive price
The equipment has high automatization degree, simple production technology, low labor intensity and production line, and there is no noise andthree-wastes during production.
Project-Feature:
1. The source of the production raw materials iswidely with no regional restriction. The product is made of sawdust, straw(rice hulls), many kinds of crop straw and inorganic material(such as talcum powder, infusorial earch and powder, infusorial earth and powder coal ash)after special technology. So this project have low production cost, small investment and fast effectiveness.
2. The equipment has high automatization degree, simple production technology, low labor intensity and production line, and there is no noise and three-wastes(waste water, waste gas and waste residue)during production.
3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.
4. The machine can produce thickness for 60mm, 90mm, 120mm, 150mm and 180mm, etc., all the length within 3m and width for 500-1000mm wallboard can be produced.
1. High strength
2. Simple, fast and firm installation
3. Easy cutting, drilling and sawing
4. Can be decorated directly
5. Competitive price
The equipment has high automatization degree, simple production technology, low labor intensity and production line, and there is no noise andthree-wastes during production.
Project-Feature:
1. The source of the production raw materials iswidely with no regional restriction. The product is made of sawdust, straw(rice hulls), many kinds of crop straw and inorganic material(such as talcum powder, infusorial earch and powder, infusorial earth and powder coal ash)after special technology. So this project have low production cost, small investment and fast effectiveness.
2. The equipment has high automatization degree, simple production technology, low labor intensity and production line, and there is no noise and three-wastes(waste water, waste gas and waste residue)during production.
3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.
4. The machine can produce thickness for 60mm, 90mm, 120mm, 150mm and 180mm, etc., all the length within 3m and width for 500-1000mm wallboard can be produced.
| Item |
Unit |
Standard Fiber Reinforced Calcium Silicate Board |
| Density | g/cm 3 | <1.3 |
| Anti-bend strength | MPa | >9 |
| Heat conduction modulus | w/m.k | <0.29 |
| Anti-impact strength | kJ/mm 2 | >2.0 |
| Pull force of screw | N/mm | >75 |
| Dry shrinkage rate | % | <0.2 |
| Non-burn performance | In accordance with standard GB8624 First Class Non-burn Material |
| , but no water drop | |||||
| High density | 1.4≤ D≤ 1.7 | ≤ 28 | __ |
| Compressive Strength | ~20 MPa (3, 000 PSI) |
| Impact Resistance | > 6 kJ/m2 |
| Tensile Strength | > 5.5 MPa |
| Density (Specific Mass) | ~1000 Kg/m3 (+/-< 2%) |
| Moisture Absorption |
~26% maximum saturation (slow absorption rate) |
| Moisture Content | ~6% |
| Water Vapour Diffusion | ~28 / 35 |
| Specific Heat | ~930 J/kgK |
| Thermal Conductivity | ~0.44 W / mK |
| Modulus of elasticity | ~6045 N/mm2 |
| Flexibility UNI E 12372 |
~20.1 N/mm2 maximum 12mm x 1220 x 2440 = 10 N/mm2 |
| Surface Alkalinity | ~10 Ph |
| Thermal Expansion Hot/Cold | 0, 01 mm/mC (from temp +20C to -20C) |
| Expansion in Water | less than < 0.02% from ambient to saturation |
| Freeze / Thaw - UNI EN 520 | 100 cycles without notable effects |
| Frost Resistance | no water drops form on surface |
| Combustibility / Fire Ratings | non-combustible / 12mm exceeds 1 hr fire rating |
| Dimensional tolerance | thick 0.2mm / width 2mm / length 3mm / Sq. 3mm |
| Toxicity Pollutants Heavy Metals - UNI EN 12457-2 | Below measurable levels of test instruments |
| Asbestos Analysis | Absent - not measurable |
| Formaldehyde Analysis | Absent - not measurable |
| Sound Attenuation (9mm) | tested design ASTM E90 = STC 48, 50, 55, & 60 |
| Color | Slate Grey and Chalk White |
| Surface texture | smooth one side; uniform machine textured back |
| Basic Compounds | (MgO)+(natural silicates)+(glass fibre)+(wood fibre) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shandong Chuangxin Building Materials Complete Equipments Co., Ltd
Location
#11667 erhuanxi road jinan city shandong province china
Contact Person
Kevin