Male Screw Thread High Quality Promised Solenoid Stem/Rubber Band And Internal Spring Core

Know more specification of BAPC214338568

Application of solenoid stem

This item Mainly uses for pneumatic series such as pneumatic solenoid valve and so on

Other type of solenoid stem/application

For instance

1.Dental equipment

2.Dust collector valve

3.Automatic vending machine

4.Pulse device

5.Pneumatic equipment

6.Auto drain industry

7.Air suspension

8.Refrigeration device

9.Hyraulic industry

10.Life water and industry water supply

11.Air condition device/Air suspension valve

12.Pipe switch

13.Evr solenoid valve

14.Forged brass solenoid valve

Solenoid stem seal choose

1.NBR

2.Viton

3.PTFE

4.EPDM

ETC

Key points of construction and installation(after assembling)

1.The installation position and height of the valve must conform to the design requirements of the mouth direction, and the connection should be firm and tight.

2.The valve must be inspected before installation. The nameplate of the valve should conform to the current national standard GB12220 "General Valve Mark".

Solenoid valve Installation notes(After assembling)

1.installation should pay attention to the arrow on the valve body should be consistent with the media flow direction. Do not install in places where there is direct drip or splash. Solenoid valve should be installed vertically.

2.solenoid valve should be guaranteed to operate normally within the 15%-10% fluctuation range of the supply voltage.

3.After installing the solenoid valve, there should be no reverse pressure difference in the pipeline. And it needs to be energized several times to make it suitable for temperature before it can be put into operation. 4.Solenoid valve should be thoroughly cleaned before installation. The medium should be free of impurities. Filter before valve. 5, when the solenoid valve malfunctions or cleaning, to ensure that the system continues to operate, it should install at bypass devices.  

Overall Dimension of pneumatic solenoid valve(This item mainly used for pneumatic solenoid valve)