1'' CA25T Goyen Type Integral Pilot Operated Dust Collector Impulse Diaphragm Valve

DESCRIPTION
High performance diaphragm valve with threaded ports. Available with integral pilot or as remotely piloted valve. Outlet at 90° to inlet. 

Goyen type T-series is designed to operate with air pressures from 0.3 to 8.6 bar. These threaded valves can be orientated in any position other than upside down or inverted. The temperature range of the threaded valves depends on the chosen model and diaphragm:
1. Nitrile diaphragms: -40 °C (-40°F) to 82°C (179.6°F)
2. Viton diaphragms -29°C (-20.2°F) to 232°C (449.6°F)

SUITABLE FOR
Dust collector applications, in particular for reverse pulse jet filter cleaning and its variations, including bag filters, cartridge filters and envelope filters, ceramic filters and sintered metal fibre filters.

Main dimension of 1'' DN25 CA25T Goyen Type Dust Collector Pulse Valve:

Technical parameters of Goyen Type T Series Reverse Pulse Jet Valves:

Details of 1'' CA25T Goyen Type Diaphragm Valve In Reverse Pulse Jet System:

Tips: All accessories can be sold separately as repair parts (Diaphragm, Solenoid Coil, Armature Assembly)

Individual Packing of 1'' CA25T Goyen Type Impulse Diaphragm Valve In dust collector:

Youtube video of CA25T 1'' Goyen Type Dust Collector Pulse Solenoid Valve:

MAINTENANCE
Before conducting any maintenance activity on the system ensure that components are fully isolated from pressure and power supplies. Pressure and power should not be reapplied until the valve has been fully assembled. Diaphragm and pilot inspection should be conducted annually.

INSTALLATION
1. Prepare supply and blowtube pipes to suit valve specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes and blowtube to valves, ensuring no excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid or connect RCA pilot port to pilot valve (RCA valves only).
6. Apply moderate pressure to system and check for installation leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!