DMF-Z-62S DMF-Y-62S Pneumatic Valve Diaphragm For Dust Collector Solenoid Valve 2 1/2 Inch FKM SBFEC Type

DMF-Z-62S DMF-Y-62S Pneumatic Valve Diaphragm For Dust Collector Solenoid Valve 2 1/2 Inch FKM SBFEC type

The pulse valve diaphragm divides the electromagnetic pulse valve we use into two parts: the front air chamber and the back air chamber. When the pulse valve in the pulse bag type dust removal system is connected to clean the compressed air, the saving hole will pass through the compressed air, and then enter the back air chamber. The pressure in the back air chamber acts on the diaphragm, making it tightly adhere to the valve At this time, the pulse valve is out of the closed state. The pulse controller can provide signals to make the armature of pulse valve move, the vent hole of the air chamber behind the valve will be opened, the back air chamber will lose pressure quickly, the diaphragm will move backward, the compressed air will be blown out from the outlet of the valve, the pulse valve is in the open state, and the electric signal output by the pulse controller is not seen, at this time, the armature of the electromagnetic pilot head of the pulse valve will reset, and the back The vent hole of the air chamber is also closed, and then the pressure in the air chamber increases. The diaphragm of the pulse valve is close to the outlet of the valve, and the pulse valve is closed to stop the injection. The time and volume of the injection are controlled by the controller.

Main dimension of BFEC Replacement Diaphragm Repair Kits:

Available Models of SBFEC Type DMF/MF Diaphragm Valve Repair Kits:

Tips: The valves mentioned, related solenoid coils and armature assembly are all supplied.

Application Examples:

YouTube video of SBFEC Type NBR Diaphragm Valve Repair Kit:

Factory Production Pictures of Solenoid Valve Diaphragm Kits:

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!