Simple Electronics Projects On Breadboard Prototyping 18.3×16.5×0.85 cm

3 Terminal StripsProduct Tie-point 1920

5 Distribution Stips Tie-point 500

4 Binding Posts

1 Pcs/set

Paper Box

Housing Material: ABS

Contact Material: Ordinary metal

Connect Type: Socket

Min.Line Spacing: Pitch=2.54mm/0.1″

Surface Finishing: Spring clip

1. 110V or 220V AC input range selectable by switch

2. Dielectric withstanding voltage: AC 500V for 1 minute

3. DC adjustment range: ±10% rated output voltage

4. Overload protection: 125%~165% shut off, AC recycle to re-start

5. Over voltage proection: 112%~135% rated output

6. Fixed switching frequency at 25KHz

7. Contact resistance: 100mΩ max

8. Insulator resistance: 1000MΩmin. @DC 500V

9. Operating temperature: -20°c~+80°c

10. Plug times: ≥10000 times

11. 100% full load bum-in test

Accept transistors, diodes, LEDS, resistors, capacitors and virtually all types of components

Twin adhesive back, could be fix and remove to any position easily

Protection: Short circuit / Overload / Over voltage

Phosphor bronze nickel plated spring clips

Accepts a variety of wrie sizes(AWG:18-32)

Cooling by free air convection

All material Rohs compliance

Low cost, high reliability

Completely reusable

Packaging & Shipping

Below is the detailed packing information: