Multifunctional High Efficiency Telecom Power System for BTS Infrastructure
Multifunctional High Efficiency Telecom Power System for BTS Infrastructure
Product Overview of 96% High Efficiency Telecom Power System
The ET4860-M3I21 DC rack power system is a high-performance, resilient DC power platform purpose-built for telecommunications infrastructure, data centers, and industrial environments that demand uninterrupted and reliable power distribution. Operating from a 220VAC single-phase input, it provides a regulated DC output adjustable from –43VDC to –58VDC, typically set at –53.5VDC. With a full output capacity of 6kW, the system supports power-intensive deployments while sustaining conversion efficiency above 96%.
Engineered for both modularity and fault tolerance, the system accommodates up to two 3000W rectifier modules in an N+1 redundant configuration. Each rectifier module weighs less than 2kg and incorporates forced-air cooling, a near-unity power factor (≥0.99), and low total harmonic distortion (THDi ≤5%) to ensure clean and efficient power conversion. Housed in a 6U chassis compatible with standard 19-inch racks, the unit enables front-access serviceability and top-panel cable entry, while its IP20 rating guarantees basic protection against solid objects.
For flexible power allocation, the integrated DC distribution panel includes BLVD functionality. System intelligence is driven by an advanced controller featuring four analog sensor inputs, eight digital status inputs, and seven configurable dry-contact relays for alarms. Remote oversight and configuration are supported through RS232/485 and SNMP interfaces, while a front-panel LCD provides local monitoring and setup options.
Built to withstand extreme conditions, the system operates reliably in temperatures ranging from –40°C to +65°C and in non-condensing humidity levels between 5% and 95%. It maintains full rated output at altitudes up to 3000 meters. With its scalable architecture and robust design, this 6kW DC power system delivers a future-ready energy solution for mission-critical applications where uptime is non-negotiable.
| Type | ET4860-M3I21 | |||
| System | Dimension | 482.6(W)*350.0(D)*1U(H) | ||
| Weight | ≤11kg (without rectifiers) | |||
| Cooling mode | Natural cooling | |||
| Installation mode | Installed on 19-inch rack | |||
| Cabling mode | Top inlet and top outlet | |||
| Maintenance mode | Front maintenance, support module grade change | |||
| Protection level | IP20 | |||
| AC Distribution |
Input mode | 220VAC single-phase, 1U push-in terminal | ||
| Input frequency | 45~65Hz, rated value: 50Hz/60Hz | |||
| DC Distribution |
Output voltage | -43~-58VDC, rated value: -53.5VDC | ||
| Maximum capacity | 6000w(2*3000w, N+1 redundancy) | |||
| Battery breakers | 1U push-in terminal*2 | |||
| Load breakers | 1U push-in terminal*2 | |||
| Rectifier | Input voltage | 85VAC～300VAC, rated 220VAC | ||
| Efficiency | >96% | |||
| Rated power | 3000W(176~300VAC) | |||
| Working temperature | -40℃~+75℃(fully output below 50℃) | |||
| Dimension | 106.5mm(W)×286mm(D)×41.5mm(1U/H) | |||
| Weight | ≤2kg | |||
| Cooling mode | Forced cooling | |||
| Power factor | ≥0.99 | |||
| THD | ≤5% | |||
| DC output | –43 ~ –58VDC, rated –53.5VDC, maximum 55A | |||
| Controller | Signal input | 3 AI(2 Battery temp., 1 ambient temp) ,7 DI | ||
| Alarm output | 6 dry contact | |||
| Communication port | RS232/485, SNMP | |||
| Display mode | LCD | |||
| Environment | Operating temperature |
-40℃ ~ +65℃ (full output below 50℃) | ||
| Storage temperature | -40℃~+70℃ | |||
| Operating humidity | 5%~95%(non-condensing) | |||
| Altitude | 0~3000m(If the altitude is within the range of 2000m to 3000m, the maximum operating temperature decreases by 1℃ as the altitude increases by 200m.) |
|||
Front of 96% High Efficiency Telecom Power System
Design of 96% High Efficiency Telecom Power System
Package Details of 96% High Efficiency Telecom Power System
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.