IP55 AC220V Cabinet Heat Exchanger Communications Base Station HEX
IP55 AC220V Door Mounted 40W/K Cabinet Heat Exchanger Communications Base Station HEX
1. Product introduction of heat exchanger
According to the indoor and outdoor temperature cycle, the unit selective operation of the heat exchanger, to ensure indoor cooling requirements under the premise of achieving the goal of energy-saving operation.
Product Features:
(1) Widely used in communications base stations, computer rooms, IDC data centers, container-type square cabins and other occasions where heat dissipation is required.
(2) Internal and external circulation IP55 protection grade, dustproof, waterproof,
(3) The system is suitable for high/low temperature 60℃/-40℃ working conditions.
2. Airflow cycle Diagram
3. Product technology parameters
|
Model |
HEX-40 |
|
Heat change(w/k) |
40 |
|
Voltage |
220VAC±15% |
|
Frequency |
50Hz |
|
Total rated power(w) |
85 |
|
Max Current(A) |
0.39 |
|
Heating Power(w) |
* |
|
Working temperature |
-5～55℃ |
|
Noise |
60dB |
|
Weight |
18Kg |
|
IP Grade |
IP55 |
|
Dimension(W×D×H) |
764*364*100mm |
|
Dimension with flange(W×D×H) |
800*400*100mm |
|
Installation method |
Door mounted |
4. Heat Exchanger Drawing
5. Installation steps
(1) Dig square holes on the installation place (the oblique part) of the base metal (usually control box) according to the dimension of the Heat exchanger. Please check the dimension before digging.
(2) Drilling M6 holes next to the square hold according to the dimension of the flange (door mounted) and cover (side mounted).
(3) Label sponge on the edge of the square holes.
(4) Push the heat exchanger by its positive side through the inside of the square holes and then fix it with bolt.
(5) Connect the power
(6) Connect the water tube.
6. Application case
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.