Rainproof Robust IP55 Outdoor Pole Mount Enclosure With Back Panel / Circuit Breaker Box

1. Application of pole mount cabinet

This pole mount outdoor cabinet ET301540-P1 is usually used in wireless communication base station, can be used for installing switch, solar controller, modem, battery, power supply, circuit board, breaker fiber device etc.

2. Features of outdoor pole mount enclosure

(1) High protection level: IP55. The cabinet is dust-proof, sun-proof and waterproof, which is used in outdoor environment.

(2) Material: 1.5mm thickness high quality galvanized steel, robust.

(3) Surface treatment: outdoor anti-corrosion powder coating.

(4) Cabinet cooling: direct ventilation.

(5) The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding.

(6) All the screws use stainless steel with high anti-corrosion.

3. Technical data of pole mount cabinet

 

Item	Type	Technical Parameter
Structure	Dimension	External Dimension: W×D×H 300×150×400mm
	Layout	1 compartment
	Equipment Installation Method	Including one back plate and one tray
	Door	With one front door and cabinet lock
	Material	Galvanized steel, single wall without insulation
	Ingress Protection	IP55
	Cable Entry	Including cable entry gland on the bottom
	Earthing	Including copper bar
	Installation	Pole mount, including installation accessories
Temperature Control	Cooling	Including vent on the two sides of cabinet
Temperature	Temperature	Working Temperature: -40°C ~ +55°C
		Storage Temperature: -50°C ~ + 70°C
		Transport Temperature: -50°C ~ +70°C
Humidity	Relative Humidity	5% ~ 100%
Pressure	Air Pressure	62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)
Radiation Intensity	Solar Radiation Intensity	1120 ×(1±5%)W/m2