Electrical Through Bore Slip Ring IP54 Protection
25.4mm Through Bore Electrical Slip Ring with IP54 Protection for Military Equipment
Description
This unit can be used in any electromechanical system that requires unrestrained, intermittent, or continuous rotation while transferring power or data.
The LPT025 series signal module slip ring provides an economical, readily available solution when a compact through-bore configuration is required. Adoption of signal module design can reduce the length of the slip ring and save installation room.
This unit provides a 25.4mm through-bore for routing hydraulic or pneumatic lines and a compact 86mm outside diameter for minimal space applications. This design features long life, fiber brush contact technology for ultimate performance in many challenging applications. Fiber brushes do not require lubrication and produce virtually no wear debris, for maintenance-free, lifetime operation.
| Specification | |
| Circuits | 1-24 circuits |
| Operating Speed | 0-100rpm |
| Working Temperature | -20℃~ +60℃ |
| Working Humidity | 60%RH |
| Electrical: | |
| Voltage Rating | 380VAC/DC |
| Current Rating | For various signals |
| Dielectric Strength | ≥1000V@50Hz between each circuit |
| Insulation Resistance | 50MΩ@ 100VDC |
| Electrical Noise | ≤70mΩ (50 rpm) |
| Mechanical: | |
| Contact Material | Precious metal |
| Lead Wire Size | AWG 28 |
| Lead Wire Length | Standard 300mm (11.811 inches) |
| Housing Material | Aluminum alloy |
| Torque | ≤9.25 g·m (for reference ) |
| Protection | IP54 |
Dimension
Product Display
Application Picture
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.