PLC Control Ceiling Roll Froming Machine With 3T Manual Decoiler 0.9mm
Post cutting Steel Stud Roll Forming Machine With 3T manual decoiler 0.9mm
Normal Speed Stud Roll Forming Machine
1. Composition of machine
Manual Un-coiler……………………………………… 1 unit
Roll forming main machine……………………………1 unit
Control panel…………………………………………..1 unit
Hydraulic station…………………………………… …1 unit
Out table ………………………………… ……………2 unit
2. Machine Detailed Parameters
| Coil width
|
According the profile |
|
Rolling Speed
|
0-15m/min |
|
Rolling Thickness
|
0.9mm Galvanized steel |
|
Control System
|
PLC |
|
Un Coiler
|
3 ton manual un-coiler |
|
Roller Stations
|
12 stations+1 station of film system |
|
Roller Material
|
45 forge steel, surface with chrome |
|
Shaft Material and DIA
|
￠56mm, material is 40CR, quenched and tempered |
|
Maim Motor Power
|
4KW |
|
Hydraulic Station Power
|
4KW |
| Cutting type |
Hydraulic cutting, 4kw
|
|
Material Of Cutting
|
Cr12, quenching 58-62℃ |
|
Tolerance
|
3m+-1.5mm |
| Electric Source |
380V, 50HZ,3 phase According to customer’s require |
|
Way Of Drive
|
By chain |
|
Color Of The Machine
|
Yellow and blue |
3. Profile drawing
4. The Chart of Process Flow
Uncoiling→Feeding material into machine→Roll forming→Rectify→Cutting→Out table
5. Specification of Components
(1) 3T Manual Un-coiler
- Adopt automatic hydraulic system for expand
- Width of feeding: 350mm
- Capability: 3 Ton
- Bound of expand &fight: 380mm—520mm
- Mode of expand &fight: inner expand &fight by manual
- Way of feeding: manual
(2) Main Roll Forming Machine
-
Roll station: 12stations+ 1 station of film system (according to the final design
-
Material of roller: 45＃forge steel, coated with chrome
-
Material of main shaft: 40cr diameter roller: Ф56mm
-
Main power: 4kw
-
Forming thickness: 0.9mm, galvanized steel
-
Transmission: By chain
(4) Post cutting system
- Machine adopt hydraulic cutting
- Cutting after forming: Cut the sheet after roll forming to required length
- Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
- Material of blade:Cr12 with heat treatment 58-60°
- Length measuring: Automatic encoder length measuring
- Tolerance of length: +/- 1.0mm
(5) Computer Control Cabinet
- Programmable setting of profile length and quantity
- Operating system language: English and Chinese
- Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
- PLC: Panasonic or customerization
6. FAQ
1) Q: Are you manufacturer or trading company?
A: We are manufacturer and trading company .
2) Q: Do you provide installing and training overseas?
A: Overseas machine install and worker training services are optional.
3) Q: How is your after sales support?
A: We provide technical support on line as well as overseas services by skillful technicians.
4) Q: How does your factory do regarding quality control?
A: There is no tolerance regarding quality control. Quality control complies with ISO9001. Every machine has to past testing running before it's packed for shipment.
5) How can I trust you that machines pasted testing running before shipping?
A: 1) We record the testing video for your reference. Or,
2) We welcome you visit us and test machine by yourself in our factory.
6) Q: Do you have this roof panel roll forming machine in stock?
A: No, machine is made to order.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.