0.75mm Height 2835 UV led diode Top View Purple Chip LED 365nm 375nm 385nm 395nm 400nm
0.75mm Height 2835 Top View Purple Chip LED 365nm 375nm 385nm 395nm 400nm
- Features:
- P-LCC-2 package.
- White package.
- Optical indicator.
- Colorless clear window.
- Ideal for backlight and light pipe application.
- Inter reflector.
- Wide viewing angle.
- Suitable for automatic placement equipment.
- Suitable for vapor-phase reflow, Infrared reflow and wave solder processes.
- Available on tape and reel (8mm Tape).
- The product itself will remain within RoHS compliant Version.
- Descriptions:
- The 2835 series is available in soft red, orange, yellow, green, blue and white. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the SMT TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
- Applications:
- Automotive: Backlighting in dashboards and switches.
- Telecommunication: Indicator and backlight in telephone and fax
- Indicator and backlight for audio and video equipment.
- Indicator and backlight in office and family equipment.
- Flat backlight for LCD’s, switches and symbols.
- Light pipe application.
- General use.
| Part No. | Chip Material | Lens Color | Source Color |
| DL-TOP2835UVC-UV365 | InGaN | Water Clear | Purple |
Purple LED Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | Max. | Unit |
| Power Dissipation | PD | 150 | mW |
|
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 120 | mA |
| Continuous Forward Current | IF | 30 | mA |
| Reverse Voltage | VR | 5 | V |
| Electrostatic Discharge (HBM) | ESD | 1000 | V |
| Operating Temperature Range | Topr | -40℃ to +80℃ | |
| Storage Temperature Range | Tstg | -40℃ to +85℃ | |
| Soldering Temperature | Tsld | 260℃ for 5 Seconds | |
1. It is strongly recommended that the temperature of lead be not higher than 55℃.
2. Proper current derating must be observed to maintain junction temperature below the maximum.
3. LEDs are not designed to be driven in reserve bias.
Purple LED Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity * | IV | 15 | 28 | --- | IF=30mA | |
| Radiant Intensity | Ie | 5.05 | 7.07 | ---- | mW/sr | IF=30mA |
| Viewing Angle * | 2θ1/2 | --- | 120 | --- | Deg | IF=30mA |
| Peak Emission Wavelength | λp | --- | 360 | --- | nm | IF=30mA |
| Dominant Wavelength | λd | --- | 365 | --- | nm | IF=30mA |
| Spectral Line Half-Width | △λ | --- | 25 | --- | nm | IF=30mA |
| Forward Voltage | VF | ---- | 2.63 | ---- | V | IF=5mA |
| ---- | 2.84 | ---- | IF=20mA | |||
| 3.0 | 3.30 | --- | IF=30mA | |||
| Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Company introduction:
HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.
why choose DOUBLE LIGHT?
1. Well-known chip material
2. 99.99% gold wire bonding
3. 3 years warranty
4. Over 10 years work experience technical service team
5. 24 hours service Professional sales team
6. Free Sample is available
7. Fast delivery
8.100% QC inspection Before Shippment
9. Aiming at the consult of "high quality, zero defect”, give you the best quality, best service.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.