5mm led emitting diode Cylindrical Without Flange dip lamp led full Color RGB Blinking led chip
Features:
- Single lamp with 3 original colors (red, green and blue).
- Designed for bonding with LED chip.
- Triple chips embedded.
- Multiple colors compose full spectrums.
- Electricity control IC embedded.
- Lens size with 5mm / 8mm / 10mm options.
- High intensity.
- Viewing Angles: 60°.
- Fancy, fun, hottest in the market.
- Operating voltage range: 4.50~10.00V DC.
- Blinking frequency: 2.4Hz (VDD=4.50V).
- Frequency tolerance: ± 20%.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The Ultra Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode.
- The Pure Green source color devices are made with InGaN on Sapphire substrate Light Emitting Diode.
- The Blue source color devices are made with InGaN on Sapphire substrate Light Emitting Diode.
Applications:
- New trend creations.
- Low energy consumptions.
- Low maintenance costs.
- High application design flexibility.
- High reliability.
- Status indicators.
- Commercial use.
- Advertising Signs.
- Toys / sports utilities.
- Miniature key chains.
- Effect Lights.
- Display / decoration lights.
- Electronic displays and signals.
- Interior decoration lights.
- Indicator lights.
- Solar energy lights / garden lights.
- Monitor.
- Telephone.
- Computer.
- Circuit board.
| Part No. | Chip Material | Lens Color | Source Color | |
| DL-F50SRGBC2E-F2 | R | AlGaInP | Water Clear | Ultra Red |
| G | InGaN | Pure Green | ||
| B | InGaN | Blue | ||
Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | Max. | Unit |
| Power Dissipation (Per Chip) | PD | 200 | mW |
|
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 100 | mA |
| Forward Current | IF | 40 | mA |
| Derating Linear From 50℃ | 0.4 | mA/℃ | |
| Reverse Voltage | VR | 5 | V |
| Electrostatic Discharge (HBM) | ESD | 2000 | V |
| Operating Temperature Range | Topr | -40℃ to +85℃ | |
| Storage Temperature Range | Tstg | -40℃ to +100℃ | |
|
Lead Soldering Temperature [4mm (.157″) From Body] |
Tsld | 260℃ for 5 Seconds | |
Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol |
Emitting Color |
Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity * | IV | Red | --- | 1000 | --- | mcd |
VDD=4.50V (Note 1) |
| Green | --- | 2000 | --- | ||||
| Blue | --- | 1000 | --- | ||||
| Viewing angle | 2θ1/2 | --- | --- | 60 | --- | Deg |
VDD=4.50V (Note 2) |
| Peak Emission Wavelength | λp | Red | --- | 632 | --- | nm | VDD=4.50V |
| Green | --- | 518 | --- | ||||
| Blue | --- | 468 | --- | ||||
| Dominant Wavelength | λd | Red | --- | 624 | --- | nm |
VDD=4.50V (Note 3) |
| Green | --- | 523 | --- | ||||
| Blue | --- | 470 | --- | ||||
| Spectral Line Half-Width | △λ | Red | --- | 20 | --- | nm |
IF=20mA (Per Chip) |
| Green | --- | 35 | --- | ||||
| Blue | --- | 25 | --- | ||||
| Blinking Frequency | F | --- | --- | 2.4 | --- | Hz | VDD=4.50V |
| Frequency tolerance | Fled | --- | --- | ±20% | --- | Hz | VDD=4.50V |
| Turn On Time | Duty | --- | --- | 1/20 | ms | VDD=4.50V | |
| Operating Voltage | VF | --- | 2.00 | 4.50 | 5.00 | V | |
| Reverse Current | IR | --- | --- | --- | 50 | µA | VR=5V |
Notes:
1. Luminous Intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
4. All specs and applications shown above subject to change without prior notice.
Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
LED Emitting Diodes Package Dimension:
HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines,which include THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.
Please contact with me to help you find your right product and get your best price.
Email:Facebook@doublelight.com.cn
WeChat:13750005407
Whatsapp:+86 13750005407
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.