0.62mm Height 1010 Package Full-Color Chip LED

Features:

• P-LCC-4 package.
• side view SMD.
• White package.
• Wide viewing angle.
• Colorless clear window.
• Inter reflector.
• Ideal for backlight and light pipe application.
• Suitable for vapor-phase reflow, Infrared reflow and wave solder processes.
• Computable with automatic placement equipment.
• Available on tape and reel (12mm Tape).
• The product itself will remain within RoHS compliant Version.

Descriptions:

• The R1010 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the SMT Side View LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
• G•SiC Technology.

• Applications:

• Optical indicators.
• Coupling into light guides.
• Back lights (LCD, switches, key, displays, illuminated advertising, general lighting).
• Interior automotive lighting (e.g.dashboard backlighting).
• Automobile’s Applications.
• Marker lights (e.g.steps,exit ways, etc)
• Signal and symbol luminaire.
• Flat backlight for LCD’s, switches and symbols.
• Light pipe application.
• General use.

• Part No.	Chip Material		Lens Color	Source Color
  DL-TOP1210RGBC-A1	R	AlGaInP	Water Clear	Hyper Red
  	G	InGaN		Pure Green
  	B	InGaN		Blue

Absolute Maximum Ratings at Ta=25℃

0404 RGB SMD LEDs Electrical Optical Characteristics at Ta=25℃

Notes:

1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
2. θ_1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

1010 RGB SMD LEDs Package Dimension:

Typical Electrical / Optical Characteristics Curves

• (25℃ Ambient Temperature Unless Otherwise Noted)

• CIE Chromaticity Diagram:

• Hyper Red:

• Pure Green:Blue:
•  
• Reliability Test Items And Conditions (Per Chip):

• The reliability of products shall be satisfied with items listed below:

  Confidence level: 90%.

  LTPD: 10%.

  1) Test Items and Results:

  No.	Test Item	Test Hours/Cycles	Test Conditions	Sample Size	Ac/Re
  1	Resistance to Soldering Heat	6 Min	Tsld=260±5℃, Min. 5sec	25pcs	0/1
  2	Thermal Shock	300 Cycles	H: +100℃ 5min ∫ 10 sec L: -10℃ 5min	25pcs	0/1
  3	Temperature Cycle	300 Cycles	H: +100℃ 15min ∫ 5min L: -40℃ 15min	25pcs	0/1
  4	High Temperature Storage	1000Hrs.	Temp: 100℃	25pcs	0/1
  5	DC Operating Life	1000Hrs.	IF=20mA	25pcs	0/1
  6	Low Temperature Storage	1000Hrs.	Temp: -40℃	25pcs	0/1
  7	High Temperature/ High Humidity	1000Hrs.	85℃/85%RH	25pcs	0/1

   

  2) Criteria for Judging the Damage:

  Item	Symbol	Test Conditions	Criteria for Judgment
  			Min	Max
  Forward Voltage	VF	IF=20mA	---	F.V.*)×1.1
  Reverse Current	IR	VR=5V	---	F.V.*)×2.0
  Luminous Intensity	IV	IF=20mA	F.V.*)×0.7	---