1W 3W 6 pin High Power RGB Full Color LED for stage lighting for wall wash lamp
1W 3W 6 pin High Power RGB Full Color LED for stage lighting for wall wash lamp
Features:
- Very long operating life (up to100k hours).
- Three chips (color) in one package.
- Independent control of each color.
- More energy efficient than incandescent and most halogen lamps.
- Low voltage operated.
- Instant light.
- Long operating life.
- IR reflow process compatible.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- DL-HP10RGBC is one of the highest flux LEDs in the world. It is designed to satisfy applications of Solid-State lighting. It is designed to have three chips in one package. It has various colors for choice and can be independently controlled. More important, it can be pass reflow process.
Applications:
- Automotive: Backlight in dashboards and switches.
- Telecommunication: Indicator and backlight in telephone and fax.
- Indicator and backlight for audio and video equipment.
- Indicator and backlight in office and family equipment.
- Flat backlight for LCD’s, switches and symbols.
- Light pipe application.
- General use.
| Part No. | Chip Material | Source Color | |
| DL-HP10RGBC-3W | R | AlGaInP | Ultra Red |
| G | InGaN | Pure Green | |
| B | InGaN | Blue | |
Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | Rating | Units |
| Forward Current | IF | 350 | mA |
|
Peak Pulse Current (tp≤100μs, Duty cycle=0.25) |
I pulse | 1000 | mA |
| Reverse Voltage | VR | 5 | V |
| LED Junction Temperature | Tj | 135 | ℃ |
| Operating Temperature Range | Topr | -40 to +80 | ℃ |
| Storage Temperature Range | Tstg | -40 to +100 | ℃ |
| Soldering Time at 260 ℃ (Max.) | Tsol | 5 | Seconds |
High Power RGB SMD LEDs Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol | Emitting Color | Min. | Typ. | Max. | Unit | Test Condition |
| Viewing Angle | 2θ1/2 | Full color | --- | 120 | --- | Deg | IF=350mA |
| Forward Voltage | VF | Red | 2.0 | 2.2 | 3.0 | V | IF=350mA |
| Green | 2.8 | 3.2 | 4.0 | ||||
| Blue | 2.8 | 3.5 | 4.0 | ||||
| Peak Emission Wavelength | λp | Red | --- | 625 | --- | nm |
Measurement @Peak |
| Green | --- | 520 | --- | ||||
| Blue | --- | 465 | --- | ||||
| Dominant Wavelength | λd | Red | 620 | 626 | 630 | nm | |
| Green | 525 | 528 | 530 | ||||
| Blue | 460 | 464 | 470 | ||||
| Spectral Line Half-Width | △λ | Red | --- | 18 | --- | nm | IF=350mA |
| Green | --- | 36 | --- | ||||
| Blue | --- | 20 | --- | ||||
| Luminous Flux | Фv | Red | 30 | 40 | --- | lm | IF=350mA |
| Green | 30 | 50 | --- | ||||
| Blue | 5 | 10 | --- |
Notes:
1. Luminous Flux Measurement allowance is ± 10%.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
High Power RGB SMD LEDs Mechanical Dimensions:
- Typical Electrical / Optical Characteristics Curves
-
(25℃ Ambient Temperature Unless Otherwise Noted)
CIE Chromaticity Diagram:
-
Hyper Red:
- Pure Green:
Blue:
- Reliability Test Items And Conditions (Per Chip):
-
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%.
LTPD: 10%.
1) Test Items and Results:
No. Test Item Test Hours/Cycles Test Conditions Sample Size Ac/Re 1 Resistance to Soldering Heat 6 Min Tsld=260±5℃,
Min. 5sec
25pcs 0/1 2 Thermal Shock 300 Cycles H: +100℃ 5min ∫ 10 sec
L: -10℃ 5min
25pcs 0/1 3 Temperature Cycle 300 Cycles H: +100℃ 15min ∫ 5min
L: -40℃ 15min
25pcs 0/1 4 High Temperature Storage 1000Hrs. Temp: 100℃ 25pcs 0/1 5 DC Operating Life 1000Hrs. IF=20mA 25pcs 0/1 6 Low Temperature Storage 1000Hrs. Temp: -40℃ 25pcs 0/1 7 High Temperature/ High Humidity 1000Hrs. 85℃/85%RH 25pcs 0/1 2) Criteria for Judging the Damage:
Item Symbol Test Conditions Criteria for Judgment Min Max Forward Voltage VF IF=20mA --- F.V.*)×1.1 Reverse Current IR VR=5V --- F.V.*)×2.0 Luminous Intensity IV IF=20mA F.V.*)×0.7 --- - Reel Dimensions:
-
Carrier Tape Dimensions:
Loaded quantity 2000PCS per reel.
Company introduction:
HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.
why choose DOUBLE LIGHT?
1. Well-known chip material
2. 99.99% gold wire bonding
3. 3 years warranty
4. Over 10 years work experience technical service team
5. 24 hours service Professional sales team
6. Free Sample is available
7. Fast delivery
8.100% QC inspection Before Shippment
9. Aiming at the consult of "high quality, zero defect”, give you the best quality, best service.
Other hot sell products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.


Blue:



