1010 RGB LED Chip tri color smd led 0404 led side emitting 120 led strip used by indoor signboard
1010 RGB LED Chip tri color smd led 0404 led side emitting 120 led strip used by indoor signboard
Features:
- Package in 8mm tape on 7” diameter reel.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- Full-Color Type.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The TOP 1010 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
- Besides, lightweight makes them ideal for miniature applications .etc.
Applications:
- Automotive: Backlighting in dashboard and switch.
- Telecommunication: Indicator and backlighting in telephone and fax.
- Flat backlight for LCD, switch and symbol.
- Indoor signboard use.
- General use
| Part No. | Chip Material | Lens Color | Source Color | |
| DL-TOP1010RGBC-A1 | R | AlGaInP | Water Clear | Hyper Red |
| G | InGaN | Pure Green | ||
| B | InGaN | Blue | ||
1010 side view RGB LED
Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | Emitting Color | Max. | Unit |
| Power Dissipation | PD | Hyper Red | 60 | mW |
| Pure Green | 95 | |||
| Blue | 95 | |||
|
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | Hyper Red | 100 | mA |
| Pure Green | 100 | |||
| Blue | 100 | |||
| Continuous Forward Current | IF | Hyper Red | 25 | mA |
| Pure Green | 25 | |||
| Blue | 25 | |||
| Reverse Voltage | VR | 5 | V | |
| Electrostatic Discharge (HBM) | ESD | Hyper Red | 2000 | V |
| Pure Green | 1000 | |||
| Blue | 1000 | |||
| Operating Temperature Range | Topr | -40℃ to +80℃ | ||
| Storage Temperature Range | Tstg | -40℃ to +85℃ | ||
| Soldering Temperature | Tsld | 260℃ for 5 Seconds | ||
0404 RGB SMD LEDs Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol | Emitting Color | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity | IV | Hyper Red | 120 | 140 | --- | mcd |
IF=20mA (Note 1) |
| Pure Green | 650 | 700 | --- | ||||
| Blue | 110 | 130 | --- | ||||
| Viewing Angle | 2θ1/2 | Hyper Red | --- | 120 | --- | Deg |
IF=20mA (Note 2) |
| Pure Green | --- | 120 | --- | ||||
| Blue | --- | 120 | --- | ||||
| Peak Emission Wavelength | λp | Hyper Red | --- | 632 | --- | nm | IF=20mA |
| Pure Green | --- | 520 | --- | ||||
| Blue | --- | 468 | --- | ||||
| Dominant Wavelength | λd | Hyper Red | --- | 624 | --- | nm |
IF=20mA (Note 3) |
| Pure Green | --- | 525 | --- | ||||
| Blue | --- | 470 | --- | ||||
| Spectral Line Half-Width | △λ | Hyper Red | --- | 20 | --- | nm | IF=20mA |
| Pure Green | --- | 35 | --- | ||||
| Blue | --- | 25 | --- | ||||
| Forward Voltage | VF | Hyper Red | 1.60 | 2.00 | 2.40 | V | IF=20mA |
| Pure Green | 2.80 | 3.40 | 3.80 | ||||
| Blue | 2.80 | 3.40 | 3.80 | ||||
| Reverse Current | IR | Hyper Red | --- | --- | 10 | µA | VR=5V |
| Pure Green | 50 | ||||||
| Blue | 50 |
Notes:
- Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
1010 RGB SMD LEDs Package Dimension:
Company introduction:
HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include 1010 RGB SMD LED, 0404 Side view led, THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.