2×3×4 mm or 2×5×7mm Square Rectangular Without Flange Type Red Lamp LED Diode Lights, signal indicator
Datasheet: water clear lens Emitting color: Pure Green
Blue diffuesd lens Emitting color: Blue
Red diffused lens Emitting color: Red
Green Transparent lens Emitting color: Pure Green
|
3.2×2.0mm Rectangular Without Flange Type Pure Green LED |
This is 3.2×2.0mm rectangular without flange type pure green LED, its lens color is water clear.
Features:
- Choice of various colors.
- 3.2×2mm Rectangular.
- Available on tape and reel.
- Reliable and robust.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The series is specially designed for applications requiring higher brightness.
- The LED lamps are available with different colors, intensities.
Applications:
- TV set.
- Monitor.
- Telephone.
- Computer.
- Circuit board.
- Status indicators.
- Commercial use.
- Advertising Signs.
- Back lighting.
| Part No. | Chip Material | Lens Color | Source Color | |
| DL-234PGCA-1PG70 | InGaN | Water Clear | Pure Green | |
Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | Max. | Unit |
| Power Dissipation | PD | 120 | mW |
|
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 100 | mA |
| Forward Current | IF | 30 | mA |
| Reverse Voltage | VR | 5 | V |
| Operating Temperature Range | Topr | -40℃ to +85℃ | |
| Storage Temperature Range | Tstg | -40℃ to +100℃ | |
|
Lead Soldering Temperature [4mm (.157″) From Body] |
Tsld | 260℃ for 5 Seconds | |
Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity * | IV | 1100 | 2000 | --- | mcd | IF=20mA (Note 1) |
| Viewing Angle * | 2θ1/2 | --- | 70 | --- | Deg | IF=20mA (Note 2) |
| Peak Emission Wavelength | λp | --- | 518 | --- | nm | IF=20mA |
| Dominant Wavelength | λd | --- | 523 | --- | nm | IF=20mA (Note 3) |
| Spectrum Radiation Bandwidth | Δλ | --- | 35 | --- | nm | IF=20mA |
| Forward Voltage | VF | 2.8 | 3.3 | --- | V | IF=20mA |
| Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
For more details, please contact us.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.