1.10mm Height 1210 Package Multi Color LED Diode Light Weight For Miniature Applications
1.10mm Height 1210 Package Bi-color (Multi-color) Chip LED red and green bi color led
Features:
- Package in 8mm tape on 7″diameter reel.
- Compatible with automatic placement equipment.
- Compatible with infrared and vapor phase reflow solder process.
- Bi-color type.
- Colors: Super Red & Yellow Green.
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The 1210 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
- Besides, lightweight makes them ideal for miniature applications, etc.
Applications:
- Automotive: Backlighting in dashboard and switch.
- Telecommunication: Indicator and backlighting in telephone and fax.
- Flat backlight for LCD, switch and symbol.
- General use.
Package Dimension:
| Part No. | Chip Material | Lens Color | Source Color | |
| DL-PCB1210RGC | R | GaAlAs | Water Clear | Super Red |
| G | GaP | Yellow Green | ||
Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | Emitting Color | Max. | Unit |
| Power Dissipation | PD | Super Red | 60 | mW |
| Yellow Green | 72 | |||
|
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | Super Red | 100 | mA |
| Yellow Green | 100 | |||
| Continuous Forward Current | IF | Super Red | 25 | mA |
| Yellow Green | 30 | |||
| Reverse Voltage | VR | 5 | V | |
| Electrostatic Discharge (HBM) | ESD | 2000 | V | |
| Operating Temperature Range | Topr | -40℃ to +80℃ | ||
| Storage Temperature Range | Tstg | -40℃ to +85℃ | ||
| Soldering Temperature | Tsld | 260℃ for 5 Seconds | ||
Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol | Emitting Color | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity | IV | Super Red | 15 | 35 | --- | mcd |
IF=20mA (Note 1) |
| Yellow Green | 16 | 30 | --- | ||||
| Viewing Angle | 2θ1/2 | Super Red | --- | 120 | --- | Deg |
IF=20mA (Note 2) |
| Yellow Green | --- | 120 | --- | ||||
| Peak Emission Wavelength | λp | Super Red | --- | 660 | --- | nm |
IF=20mA (Measurement @Peak) |
| Yellow Green | --- | 575 | --- | ||||
| Dominant Wavelength | λd | Super Red | --- | 640 | --- | nm |
IF=20mA (Note 3) |
| Yellow Green | --- | 573 | --- | ||||
| Spectral Line Half-Width | △λ | Super Red | --- | 45 | --- | nm | IF=20mA |
| Yellow Green | --- | 30 | --- | ||||
| Forward Voltage | VF | Super Red | 1.80 | 2.20 | 2.80 | V | IF=20mA |
| Yellow Green | 1.80 | 2.20 | 2.80 | ||||
| Reverse Current | IR | Super Red | --- | --- | 10 | µA | VR=5V |
| Yellow Green |
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
eye-response curve.
2. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.
Typical Electrical / Optical Characteristics Curves(25℃ Ambient Temperature Unless Otherwise Noted)
Super Red:
Yellow Green:
Reel Dimensions:
Carrier Tape Dimensions:
Loaded quantity 2000/3000PCS per reel.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.