3.00mm Round Type Housing LED Lamps Yellow Green& Ultra Yellow bi color led
3.00mm Round Type Housing LED Lamps Yellow Green& Ultra Yellow bi color led
Features:
1.Low Power consumption.
2.High efficiency and low cost.
3.Chip material: GaP&GaAlAs
4.Emitted color : Yellow Green& Ultra Yellow
5.Good control and free combinations on the colors of LED lamps.
6.Good lock and easy to assembly.
7.Stackable and easy to assembly.
8.Stackable vertically and easy to assembly.
9.Versatile mounting on P.C board or panel.
10. Stackable horizontally and easy to assembly.
11. The product itself will remain within RoHS compliant version.
Descriptions:
1.ARRAY=Plastic Holder + Combinations of Lamps.
2.The array will easily mount be applicable on any panel up to.
Applications:
1.TV set
2.Monitor
3.Telephone
4.Computer
5.Circuit board
6.Used as indicators of indicating the Degree, Functions, Positions etc, in electronic instruments.
| Part No. | Chip Material | Lens Color | Source Color |
| DL-H30D-1YGUYD | GaP | Green Diffused | Yellow Green |
| AlGaInP | Yellow Diffused | Ultra Yellow |
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25mm (.010″) unless otherwise noted.
3. Protruded resin under flange is 1.00 mm (.039″) max.
4. Specifications are subject to change without notice.
Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | Max. | Unit |
| Power Dissipation | PD | 75 | mW |
| Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 100 | mA |
| Forward Current | IF | 25 | mA |
| Reverse Voltage | VR | 5 | V |
| Operating Temperature Range | Topr | -40℃ to +80℃ | |
| Storage Temperature Range | Tstg | -40℃ to +85℃ | |
| Lead Soldering Temperature [4mm (.157″) From Body] |
Tsld | 260℃ for 5 Seconds | |
Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol | Emitting Color | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity | IV | Green | 20 | 45 | --- | mcd |
IF=20mA (Note 1) |
| Yellow | 30 | 60 | --- | ||||
| Viewing Angle | 2θ1/2 | Green | --- | 60 | --- | Deg |
IF=20mA (Note 2) |
| Yellow | --- | 60 | --- | ||||
| Peak Emission Wavelength | λp | Green | --- | 565 | --- | nm | Measurement @Peak |
| Yellow | --- | 588 | --- | ||||
| Dominant Wavelength | λd | Green | --- | 568 | --- | nm |
IF=20mA (Note 3) |
| Yellow | --- | 590 | --- | ||||
| Spectral Line Half-Width | △λ | Green | --- | 20 | --- | nm | |
| Yellow | --- | 20 | --- | ||||
| Forward Voltage | VF | Green | 1.80 | 2.20 | 2.60 | V | IF=20mA |
| Yellow | 1.80 | 2.20 | 2.60 | ||||
| Reverse Current | IR | Green | --- | --- | 10 | µA | VR=5V |
| Yellow | --- | --- | 10 |
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response
curve.
2. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength
which defines the color of the device.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.