1.50mm Height Optical Indicator RGB SMD LED Full Color 2mA
1.50mm Height Top View Full Color Chip LEDs
Features:
- P-LCC-6 package.
- White package.
- Optical indicator.
- Colorless clear window.
- Ideal for backlight and light pipe application.
- Inter reflector.
- Low current (2mA) operation.
- Wide viewing angle.
- Suitable for vapor-phase reflow, infrared reflow and wave solder processes.
- Computable with automatic placement equipment.
- Available on tape and reel (12mm Tape).
- The product itself will remain within RoHS compliant Version.
Descriptions:
- The 5050 is available in soft red, orange, yellow, green, blue and white. Due to the Package design, the LED has wide viewing angle and optimized light coupling by inter reflector, this feature makes the SMT TOP LED ideal for light pipe Application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Applications:
- Automotive: Backlight in dashboards and switches.
- Telecommunication: Indicator and backlight in telephone and fax.
- Indicator and backlight for audio and video equipment.
- Indicator and backlight in office and family equipment.
- Flat backlight for LCD’s, switches and symbols.
- Light pipe application.
- General use.
Package Dimension:
| Part No. | Chip Material | Lens Color | Source Color | |
| DL-TOP5050RGBC-05W | R | AlGaInP | Water Clear | Hyper Red |
| G | InGaN | Pure Green | ||
| B | InGaN | Blue | ||
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25mm (.010”) unless otherwise specified.
3. Specifications are subject to change without notice.
- Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | MAX | Unit | |
| Power Dissipation | PD | Hyper Red | 400 | mW |
| Pure Green | 500 | |||
| Blue | 500 | |||
|
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | Hyper Red | 180 | mA |
| Pure Green | 200 | |||
| Blue | 200 | |||
| Continuous Forward Current | IF | Hyper Red | 150 | mA |
| Pure Green | 150 | |||
| Blue | 150 | |||
| Reverse Voltage | VR | 5 | V | |
| Electrostatic Discharge (HBM) | ESD | Hyper Red | 2000 | V |
| Pure Green | 1000 | |||
| Blue | 1000 | |||
| Operating Temperature Range | Topr | -40℃ to +85℃ | ||
| Storage Temperature Range | Tstg | -40℃ to +100℃ | ||
| Soldering Temperature | Tsld | 260℃ for 5 Seconds | ||
Electrical Optical Characteristics at Ta=25℃
|
Parameters |
Symbol | Emitting Color | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity | IV | Hyper Red | 1200 | 1600 | --- | mcd |
IF=150mA (Note 1) |
| Pure Green | 2780 | 3500 | --- | ||||
| Blue | 1230 | 1580 | --- | ||||
| Viewing Angle | 2θ1/2 | Hyper Red | --- | 120 | --- | Deg |
IF=150mA (Note 2) |
| Pure Green | --- | 120 | --- | ||||
| Blue | --- | 120 | --- | ||||
| Peak Emission Wavelength | λp | Hyper Red | --- | 632 | --- | nm |
IF=150mA (Measurement @Peak) |
| Pure Green | --- | 520 | --- | ||||
| Blue | --- | 468 | --- | ||||
| Dominant Wavelength | λd | Hyper Red | --- | 624 | --- | nm |
IF=150mA (Note 3) |
| pure Green | --- | 525 | --- | ||||
| Blue | --- | 470 | --- | ||||
| Spectral Line Half-Width | △λ | Hyper Red | --- | 20 | --- | nm |
IF=150mA
|
| Pure Green | --- | 35 | --- | ||||
| Blue | --- | 25 | --- | ||||
| Forward Voltage | VF | Hyper Red | 1.80 | 2.30 | 2.40 | V |
IF=150mA
|
| Pure Green | 3.00 | 3.30 | 3.80 | ||||
| Blue | 3.00 | 3.30 | 3.80 | ||||
| Reverse Current | IR | Hyper Red | --- | --- | 10 | µA | VR=5V |
| Pure Green | 50 | ||||||
| Blue | 50 |
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
eye-response curve.
2. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device.
Reliability Test Items And Conditions (Per Chip):
The reliability of products shall be satisfied with items listed below:Confidence level: 90%. LTPD: 10%.
1) Test Items and Results:
| No. | Test Item | Test Hours/Cycles | Test Conditions | Sample Size | Ac/Re |
| 1 | Resistance to Soldering Heat | 6 Min |
Tsld=260±5℃, Min. 5sec |
25pcs | 0/1 |
| 2 | Thermal Shock | 300 Cycles |
H: +100℃ 5min ∫ 10 sec L: -10℃ 5min |
25pcs | 0/1 |
| 3 | Temperature Cycle | 300 Cycles |
H: +100℃ 15min ∫ 5min L: -40℃ 15min |
25pcs | 0/1 |
| 4 | High Temperature Storage | 1000Hrs. | Temp: 100℃ | 25pcs | 0/1 |
| 5 | DC Operating Life | 1000Hrs. | IF=20mA | 25pcs | 0/1 |
| 6 | Low Temperature Storage | 1000Hrs. | Temp: -40℃ | 25pcs | 0/1 |
| 7 | High Temperature/ High Humidity | 1000Hrs. | 85℃/85%RH | 25pcs | 0/1 |
2) Criteria for Judging the Damage:
| Item | Symbol | Test Conditions | Criteria for Judgment | |
| Min | Max | |||
| Forward Voltage | VF | IF=20mA | --- | F.V.*)×1.1 |
| Reverse Current | IR | VR=5V | --- | F.V.*)×2.0 |
| Luminous Intensity | IV | IF=20mA | F.V.*)×0.7 | -- |
Company introduction:
- HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.
Why choose DOUBLE LIGHT?
1. Well-known chip material
2. 99.99% gold wire bonding
3. 3 years warranty
4. Over 10 years work experience technical service team
5. 24 hours service Professional sales team
6. Free Sample is available
7. Fast delivery
8.100% QC inspection Before Shippment
9. Aiming at the consult of "high quality, zero defect”, give you the best quality, best service.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.