Electrodynamic Shaker For Sine Sweep, Half-sine Shock and Random Vibration Test
Electrodynamic Shaker For Sine Sweep, Half-sine Shock and Random Vibration Test
This versatile range of medium-force shakers is widely used within the automotive, aerospace, transport and packaging, and defence sectors. Coupling industry-standard performance and flexibility, they offer cost-effective and comprehensive solutions for a range of vibration testing scenarios that include product qualification and reliability tests, general stress screening, and product and package testing.
Equipment Configuration
| Item | Configuration | Qty. |
| 1. | Combo shaker | |
| A11T24 shaker ((including Pneumatic Centering Controller) | 1 set | |
| B402 blower (including silencer and Duct ) | 1 set | |
| Head Expander VT80CM | 1 set | |
| 2. | Power Amplifier | |
| LA10K Power amplifier(including Field power supply) | 1 set | |
| 3. | Shaker Controller | 1 set |
|
VCS5X-02 Shaker Controller (hardware: 2 Input /1 Drive. Application: Random/Sine/Shock ) |
1 set | |
| LTE-C02A01 Accelerometers (Including Length 7m low noise BNC-M5 cable) | 2 set | |
| Computer(Including keyboard, mouse and monitor) | 0set | |
| 4 | Operation Manual | 1 set |
| 5 | Accessories | 1 set |
| Maintenance Tools | 1 set | |
| Standard Spare Parts | 1 set |
USE SCENARIOS
- Qualification testing of automotive parts and systems, including ISO/TS 16949, SAE and other standards
- Electronic assembly and computer equipment testing
- Avionics and military hardware standard testing, such as ISO 9000, MIL-STD, AS9000 and RTCA DO-160 Section 8
- Telecommunication and satellite component testing
- General stress screening, such as ISO 5344, HALT, ALT and HASS
- Product and package testing, like ISTA and ASTM 4169
They feature a usable vibration control frequency range from DC up to 3 kHz and are suitable for high-acceleration shock tests as well as for testing with sinusoidal, random and transient excitations.
Interchangeable and lightweight armatures – with diameters of 240, 440 and 640 mm – economically increase adaptability, since the same shaker can be fitted with different armatures to adjust the mounting surface according to the size of the device under test.
Specifications
| Shaker Specifications | |
| Peak Sine (Pk) | 1100Kg.f peak (11KN) |
| Random (RMS) | 1000Kg.f r.ms (10KN) @ISO5344 |
| Shock (Pk) | 2200Kg.f peak (22KN) @6ms |
| Usable Frequency | 1～3000Hz |
| Maximum Displacement (p-p) | 76mm (3inch) intermittence,51mm (2inch) continuous |
| Max. velocity | 2.0m/s |
| Max. acceleration | Sine: 85G ；Random: 60G |
| Vertical Load Support | 300 kg |
|
Body Suspension Natural |
Less than 2.5 Hz |
| Armature Diameter | Ф240 mm |
| Armature Weight | 13kg |
| Allowable partial force | 350.N.M |
|
Fundamental Resonance |
2,500 Hz (nom.) +/- 5% |
|
Load Attachment |
16 stainless steel M10 Inserts |
| Stray Flux Density | ＜10gauss |
| Allowable partial force | 500.N.M |
| Shaker dimensions | 960mmL×745mmD×790mmH |
| Weight of Shaker | About 1000Kg |
| Power Amplifier Specifications LA10K | |
| Rated Output Capacity | 12KVA |
| Signal to Noise Ratio | Greater than 65 dB |
| Amplifier Efficiency | Greater than 90% |
| Amplifier Overall Dimensions | 940mmL×715mmD×780mmH |
| Weight of Amplifier | About 400Kg |
| Interlock Protection | ●Input Over/Under Voltage ●Logic Fault ●Output Over Voltage/Current ●Control Power ●External ●Shaker Oil Pressure ●Module O/T ●Shaker Temp ●Shaker Travel |
Customer Services
Presales:
- Technical consultation: test method, laboratory planning and suggestion.
- Equipment selection: selection scheme, FAQ.
- Product testing scheme.
In-Sales:
- Customer communication and progress report.
- Guidance for pre-installation preparation, equipment commissioning and test run.
- Calibration (when Third Party’s verification is required).
After-Sales:
- Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
- Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
- Technical support: special paid services are provided according to customer’s needs.
Detailed Pictures:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.