High Speed Shock Test System For 15,000g @ 0.14ms & 20000g@0.1ms Comply With MIL-STD, IEC Standard
High Speed Shock Test System For 15,000g @ 0.14ms & 20000g@0.1ms comply with MIL-STD, IEC standard
High Speed Shock Test System Product description
The UHSKT series is mainly used in the shock test of electronic products, aerospace, ships, military industry, automotive parts, transportation and other fields. The shock test of half sine wave can be carried out.
The equipment meets the standards of GB/T2423-2008, GJB150, GJB360, GJB548, GJB1217, MIL-STD-202F, IEC-68-2-27, MIL-STD-810F, MIL-STD-883E, etc.
Acceleration, pulse duration and velocity change
|
Acceleration G |
Pulse Duration ms |
Velocity Change m/s |
Allowable Error |
| 30 | 11 | 1.84 | ±10%G;±20%ms |
| 30 | 18 | 2.91 | ±10%G;±20%ms |
| 50 | 11 | 3.03 | ±10%G;±20%ms |
| 100 | 6 | 3.38 | ±10%G;±20%ms |
| 100 | 11 | 6.2 | ±10%G;±20%ms |
| 150 | 6 | 5.01 | ±10%G;±20%ms |
| 500 | 1 | 3.08 | ±10%G;±10%ms |
| 1000 | 1 | 6.0 | ±10%G;±10%ms |
| 1000 | 0.3 | 4.2 | ±20%G;±10%ms |
| 6000 | 0.3 | 7.5 | ±20%G;±10%ms |
| 1500 | 0.5 | 4.50 | ±20%G;±10%ms |
| 2000 | 0.5 | 6.5 | ±20%G;±10%ms |
| 3500 | 0.5 | 7.8 | ±20%G;±10%ms |
| 3000 | 0.2 | 8.3 | ±20%G;±10%ms |
| 10000 | 0.20 | 12.04 | ±20%G;±5%ms |
| 15000 | 0.14 | 11.14 | ±20%G;±5%ms |
| 20000 | 0.10 | 11.35 | ±20%G;±5%ms |
| 25000 | 0.10 | 12.48 | ±20%G;±5%ms |
| 30000 | 0.10 | 11.21 | ±20%G;±5%ms |
| 35000 | 0.10 | 12.92 | ±20%G;±5%ms |
High Speed Shock Test System Product Features
- Lifting mechanism is a precision screw. It is driven by a precision motor, and guided by two precision guide columns to ensure that the platform rise and fall smoothly. Precise shock data accuracy is ensured.
- Impact pre-accumulation acceleration mechanism, make the impact platform greater than +1G acceleration free fall.
- The shock base adopts the structural design of the airbag + shock absorber damper, which does not affect the floor structure during impact.
- The machine base is designed without resonance and the impact data is accurate
- The use of gas-liquid pressure brake friction friction brake mechanism, no secondary impact function
- Equipped with pressure storage tank to ensure the stability of the brake mechanism and ensure the integrity of the test data
- Single-channel data measurement acquisition, acceleration data measurement, storage, report printing, data callback, database management and other functions
High Speed Shock Test System Shock testing systems Specifications
| Main parameters of the shock tester | |
| Operating platform | 300 × 300 mm |
| Max. load | 30 KG |
| Peak acceleration | 200-100000m/s2 (20 -10000G) |
| Pulse duration | 0.2~18 ms (Half sine wave) |
| Equipment dimensions | 1350mm x 1250 mm x 3300 mm |
| Equipment weight | 1850 kg |
| Power & Air supply | 3phase 380V±10％ 50Hz,5KVA & 0.5—0.7MPa |
| Dual Mass Shock Amplifier | |
| Table size | 300 x 300 mm |
| Max. load | 30 kg |
| Peak acceleration | 35000G |
| Pulse duration | 0.1—0.5ms |
| Measuring system | |
| Input channels | 8 channels |
| Sampling frequency | 1MHz |
| Input mode | Support voltage, IEPE, Charge signal input directly. |
| Coupled mode | AC, DC, ICP |
| ADC resolution | 16 bits |
| Dynamic range | 80dB |
| harmonic distortion | <-70dB |
| Signal to Noise Ratio | >70dB |
| Pulse duration | Narrow -0.1ms |
| Acceleration range | Up to 100,000gn |
| Frequency accuracy | 0.01% |
| Voltage range | -10Vpeak--+10Vpeak |
| Supportive standard | GB, GJB, MIL-STD, ISO, IEC, user defined |
| Shock waveform | Half-sine |
| Communication interface | USB2.0 |
| Operating system | Win7/10 |
| Type | Shock acceleration sensors |
| Model | 3200B2T |
| Output mode | Charge type |
| Sensitivity | 0.05 mV/g±25% |
| Frequency range | 0.5 to 20K Hz frequency range (±10%) |
| Acceleration range | 50000G |
| Operating environment | -51 to +121℃ |
Shock testing systems more details
Service
Pre-Sales Service
1)Technical consultation: test method, laboratory planning and suggestion.
2)Equipment selection: selection scheme, FAQ.
3)Product testing scheme.
4)Customer communication and progress report.
After-Sales Service
1)Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
2)Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
3)Technical support: special paid services are provided according to customer’s needs.
Labtone Packing &Shipping
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.