ISTA Random Vibration Test Machine Vertical Electrodynamic ASTM D 4728
ISTA Random Vibration Test Machine, Vertical Vibration Tester ASTM D 4728, ISO 13355
Vibration Test Machine Specifications: EV310
| Shaker Specifications A11T24 | |
| Peak Sine (Pk) | 1000Kg.f peak (10KN) |
| Random (RMS) | 1000Kg.f r.ms (10KN) @ISO5344 |
| Shock (Pk) | 2000Kg.f peak (20KN) @6ms |
| Usable Frequency | DC～3000 Hz |
| Maximum Displacement (p-p) | 76 mm (3inch) |
| Max. velocity | 2m/s |
|
Max. Acceleration ( armature only) |
Sine:85g (833 m/s2)；Random: 60g (588 m/s2) |
| Max payload | 300 kg |
|
Body Suspension Natural Frequency (Thrust Axis) |
Less than 2.5 Hz |
| Armature Diameter | Ф240 mm |
| Armature Weight | 14kg |
|
Fundamental Resonance Frequency (Bare table) |
2,400 Hz (nom.) +/- 5% |
|
Load Attachment Points (Standard) |
16 stainless steel M10 Inserts |
| Stray Flux Density | ＜10gauss |
| Allowable partial force | 350.N.M |
| Shaker dimensions | 960mmL×745mmD×790mmH |
| Weight of Shaker | About 900Kg |
The model selection of the vibration test system has the following steps:
1. Determine the test frequency range and limit peak motion (acceleration, velocity and displacement) according to the test conditions.
2. Determine the mass (DUT) of the item under test and the dimensions of the mounting surface required to bolt the DUT to a shaker table with its center of gravity (CG) over the table’s center. This may require use of a head expander and/or other mounting fixture. Determine the mass of such additional hardware including all mounting fasteners.
Look at the shaker specifications for the test system. Verify that the mass of the part under test and any mounting fixture is less than the maximum static load rating of the shaker. Verify that the component under test (or its mounting hardware) can be bolted to the shaker armature or head expander. Add the effective armature mass and expansion head mass to the mass of the object under test as well as the mass of any mounting clamps and fasteners and the mass of any accelerometers mounted on the object under test -- this is the total moving mass the shaker must move during the test. Multiply the total moving mass by the acceleration determined in step 1 to calculate the force required. Verify that the test and DUT required to determine the test frequency range, force, peak acceleration, peak velocity, and peak displacement is less than the corresponding performance rating of the selected shaker system. If this is true, the shaker chosen is acceptable. If not, a more powerful shaker is required.
Working Principle:
Application:
Services:
- Uptime is paramount: We strive to ensure rapid, high-quality service and support
- Dialogue: We are committed to responding promptly to all customer requests and questions and to keeping customers informed regarding service and support status so they can plan efficiently
- Skilled team of technicians and engineers: Our staff continuously receives the latest training in order to deliver the best possible service and support
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.