Simulates Packaging Anti Damage Ability Incline Impact Tester 500kg Payload
500kg payload Incline Impact Testing Machine Simulates The Anti-damage Ability Of Packaging
- The operation is pneumatic, fast, safe and reliable.
- The angle between the guide surface and the horizontal level is 10°
- Perfect protection device and safety interlock device to ensure the safety of the operator.
- Accept special customization, and additional installation of speed measuring device. Provide accurate impact velocity measurement.
Specifications
| Model | IPT-300 | IPT-500 |
| Max. Payload | 300kg | 500kg |
| Max. Impact Velocity | 2.1m/s | |
| Tolerance of shock distance | ±3% | |
| Max. Size of specimen | 1200*1200*1600mm | |
| Sliding trolley | 600*550*2500mm | |
| Impact base size | 1200*1200mm | |
| Power | 3-phase 380V 50/60Hz | |
| Standards | JB/T6868-93 ISO2248-1972(E) | |
FAQ
1.How do you attach the hardware you're testing to your shaker?
By means of a fixture, usually aluminium or magnesium for lightness coupled with rigidity. They can be cast, or smaller fixtures machined from solid stock. Most fixtures are welded.
2.How do you control shakers?
If we're looking for resonances in the product we're testing, we command the shaker to shake the product at one frequency at a time but to vary that test frequency, to sweep it over a range of frequencies. But more realistically, we command the shaker to vibrate randomly and to excite all the resonances simultaneously. Control commands go into the keyboard of a specially programmed computer.
3.What are those resonances? Are they bad?
Have you ever noticed the steering wheel moving with rather a large displacement amplitude, larger than the input to the column? That magnification is called resonance. Possibly it annoys you. There's a slight chance that in a few years that whipping of the steering column might cause bending fatigue failure. When we shake an automotive or ship or land vehicle instrument, we're looking for, for example, portions of printed wiring boards (PWBs) responding with greater motion than we're inputting. That flexing may damage PWB wiring, it may damage the attached components, and it will damage the soldered connections between components and the PWB.
Service
Pre-Sales Service
- Technical consultation: test method, laboratory planning and suggestion.
- Equipment selection: selection scheme, FAQ.
- Product testing scheme.
- Customer communication and progress report.
In-sales
- Customer communication and progress report.
- Guidance for pre-installation preparation, equipment commissioning and test run.
- Calibration (when third party's verification is required).
After-Sales Service
- Technical training: opreation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
- Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
- Technical support: special paid services are provided according to customer's needs.
Product
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.