YS-100 Automatic Cutting Machine With Eye Sensor For Tube/Label With Marks

Intro:

Automatic Cutting Machine with sensor is specially desinged for material with marks, such as lables, packing sleeves. The sensor can detect mark, and cut accurately to avoid the machine tolerance. It can make sure the machine can always cut at same place.

Suitable:

This cutting machine is suitable for material with marks, such as packing sleeve, labels, tubes with marks, etc. The sensor can detect marks, then feedback to machine for cutting. Accurate cutting without error.

Parameters

Features of tube cutting machine

1.*English manual and display which is easy to understand

2.*Best service:mother board and system are developped by our own engineer.Best technology support and after sale service will be provided

3.*High speed: It can cut 100~120 cut per minute. (50mm long)
4.*Accuracy: Small cutting length such as 30mm,the error is below 1mm
5.*Cutting type: Cold cutter which is durable or hot knife cutting .
6.*Automatic operation:Easy operating and safety machine. It works automatically only by setting length and quantity
7.*Automatic stop: It stops automatically if materials run out during operation
.8.*There is a pole on the machine which can hold the material roller below 10kg.

9.*Materials Can Cut: pipe,tube,belt, webbing, fabric, cloth, foam,ribbon,plastic,film,label,wire,shrinkable tube,cable ties,silicone tube,pvc tube,wiring,plastic hose pipe,rubberhose,PTFE tube,chequered tube,velcro,insulated sleeve,insulation paper,copper foil and so on.

Cutting samples

Machine video: