ER 10G SFP+ Transceiver 40KM CWDM 1470-1610NM LC Connector Communication Equipment

10G SFP+ ER 40KM CWDM 1470-1610NM LC Connector Communication Equipment

HLSCxx1XL-CD40 CWDM 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 40km. This transceiver consists of two sections: The transmitter section incorporates a CWDM EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

Supports 9.95 to 11.3Gb/s bit rates

Duplex LC connector

Hot pluggable SFP+ footprint

Cooled 1470nm~1610nm EML transmitter, PIN photo-detector

Applicable for 40km SMF connection

Low power consumption, < 1.2W

Digital Diagnostic Monitor Interface

Optical interface compliant to IEEE 802.3ae 10GBASE-ER

Applications

10GBASE-ER at 10.3125Gbps

10G Ethernet

Other optical links

Digital Diagnostic Specifications

The Hilink 10G SFP+ CWDM ER 40KM  transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.

Notes:

1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75

2. Internally measured

3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser

Real Picture

Package & Shipping

International Express: DHL, FedEx,EMS,TNT, UPS and so on. It takes 3-7 days.

Our Service

More than 14 years Fiber Optic Module Manufacture

1 To 1 Customer Service

Attractive Price

High Quality