Carbon Steel Vertical Air Receiver Tank For Water Treatment Customized Color

Carbon steel vertical air compressor tank / small compressed air tank for water treatment
 
 
1. The important of vertical air compressor tank play in air compressor system :
 
Vertical Air compressor tank is an integral and important part of any compressed air system. Typically a receiver tank is sized at 6-10 times the flow rate of the system. So, if a compressor has a rating of 25 cfm at 100 psi, the receiver tank should be 150 cubic feet, minimum. In a compressed air system, a receiver tank provides the following benefits:

• Air compressor tank acts as a reservoir of compressed air for peak demands.
• Air compressor tank will help remove water from the system by allowing the air a chance to cool.
• Air compressor tank minimizes pulsation in the system caused by a reciprocating compressor or a cyclic process downstream.

Much like a water reservoir provides water during times of drought and stores water during the wet times, an air receiver tank compensates for peak demand and helps balance the supply of the compressor with the demand of the system.
Receiver tanks are required by law to have a pressure relief valve and a pressure gauge. The relief valve should be set to 10% higher than the working pressure of the system.
 
2.  Company Advantages
 

 
3. Product specifications:
 

 
4. Our production process
 
1. Lofting, marking-off & cutting.
2. Manufacturing & welding
a. Make holes
b. Crimping plate
c. Spheronization
d. Welding
e. Install
f. Circumferential welding
3. Surface treatment
a. For Carbon Steel (1)Sand blasting (2)Primer (for 2 times) (3)Finishing coat
b. For Stainless steel (1)Sand blasting OR (2) Polishing