K9001488 Joint Fork For DOOSAN DX140W DX160W Excavator Front Axle Parts
- K9001488 Joint Fork Used For DOOSAN DX140W DX160W Excavator Front Axle Parts
- Specifiion
| Parts No. | K9001488 |
| egory | Doosan Wheel excavator parts |
| Applicable model | DX140W DX160W |
| Item Name | Joint fork |
| MOQ | 1 piece |
| Lead time | stock for urgent delivery |
| Design | made in PRC |
| Port | guangzhou |
| Delivery method | By sea/air, express DHL FEDEX UPS TNT EMS |
- Applible models
DX140W / DX160W TIER-II
AXLE CASING - FRONT AXLE » FORK;JOINT K9001488
DX140W TIER-III
FENDER & LADDER-FOR GERMAN » FORK;JOINT K9001488
DX140W/DX160W
AXLE CASING - FRONT AXLE » FORK;JOINT K9001488
- alog parts list diagram
| Pos. | Part No | Qty | Parts name | Comments |
| 10 | 110913-00080 | [2] | ||
| 10 | K9001480 | [2] | CASING;AXLE | |
| 100 | K9000114 | [2] | BEARING;ROLLER | |
| 100 | K9000114 | [1] | BEARING;ROLLER | |
| 120 | 2.180-00450 | [2] | O-RING | |
| 130 | 1.120-00134 | [32] | SCREW;HEXAGON | |
| 130 | K9001477 | [32] | SCREW | |
| 140 | 2.114-00867 | [32] | WASHER | |
| 241 | K9001478 | [1] | PLUG;SCREW | |
| 242 | 1.180-00135 | [1] | . O-RING | |
| 251 | K9001479 | [1] | PLUG;SCREW | |
| 252 | 1.180-00135 | [1] | . O-RING | |
| 30 | 190113-00017 | [1] | ||
| 30 | K9001481 | [1] | HOUSING;DIFFERENTIAL | |
| 340 | 1.110-00039 | [2] | BUSH | |
| 350 | K9001482 | [2] | SEAL;SHAFT | |
| 450 | 130712-00276 | [2] | ||
| 450 | K9001484 | [2] | SHAFT;UNIVERSAL | |
| 450-1. | K9001485 | [1] | FORK;SHIFT | |
| 450-2. | K9001486 | [2] | JOINT;CROSS | |
| 450-3. | 230106-00067 | [1] | ||
| 450-3. | K9001487 | [1] | FORK;JOINT | |
| 450-4. | K9001488 | [1] | FORK;JOINT | |
| 450-4. | 230106-00068 | [1] | ||
| 50 | 1.114-00057 | [2] | SHIM A=1.95 | |
| 50 | 1.114-00060 | [2] | SHIM A=0.1 | |
| 50 | 1.114-00061 | [2] | SHIM A=0.15 | |
| 50 | 2.114-00571 | [2] | SHIM A=0.2 | |
| 50 | 1.114-00063 | [2] | SHIM A=0.25 | |
| 50 | 1.114-00065 | [2] | SHIM A=0.3 | |
| 50 | 1.114-00066 | [2] | SHIM A=0.35 | |
| 50 | 2.114-00572 | [2] | SHIM A=0.4 | |
| 50 | 2.114-00573 | [2] | SHIM A=0.45 | |
| 50 | 2.114-00574 | [2] | SHIM A=0.5 | |
| 50 | 2.114-00575 | [2] | SHIM A=0.55 | |
| 50 | 2.114-00576 | [2] | SHIM A=0.6 | |
| 50 | 1.114-00068 | [2] | SHIM A=0.65 | |
| 50 | 1.114-00069 | [2] | SHIM A=0.70 | |
| 50 | 1.114-00070 | [2] | SHIM A=0.75 | |
| 50 | 2.114-00577 | [2] | SHIM A=0.8 | |
| 50 | 1.114-00071 | [2] | SHIM A=0.85 | |
| 50 | 1.114-00073 | [2] | SHIM A=0.90 | |
| 50 | 1.114-00074 | [2] | SHIM A=0.95 | |
| 50 | 2.114-00579 | [2] | SHIM A=1.0 | |
| 50 | 1.114-00079 | [2] | SHIM A=1.05 | |
| 50 | 1.114-00083 | [2] | SHIM A=1.10 | |
| 50 | 1.114-00085 | [2] | SHIM A=1.15 | |
| 50 | 2.114-00580 | [2] | SHIM A=1.2 | |
| 50 | 1.114-00091 | [2] | SHIM A=1.25 | |
| 50 | 1.114-00095 | [2] | SHIM A=1.30 | |
| 50 | 1.114-00097 | [2] | SHIM A=1.35 | |
| 50 | 1.114-00101 | [2] | SHIM A=1.4 | |
| 50 | 1.114-00103 | [2] | SHIM A=1.45 | |
| 50 | 1.114-00108 | [2] | SHIM A=1.50 | |
| 50 | 1.114-00110 | [2] | SHIM A=1.55 | |
| 50 | 1.114-00113 | [2] | SHIM A=1.60 | |
| 50 | 1.114-00114 | [2] | SHIM A=1.65 | |
| 50 | 1.114-00125 | [2] | SHIM A=2.00 | |
| 50 | 1.114-00198 | [2] | SHIM A=1.47 | |
| 50 | 1.114-00202 | [2] | SHIM A=1.63 | |
| 50 | 1.114-00204 | [2] | SHIM A=1.75 | |
| 50 | 1.114-00203 | [2] | SHIM A=1.70 | |
| 50 | 1.114-00207 | [2] | SHIM A=1.80 | |
| 50 | 1.114-00208 | [2] | SHIM A=1.85 | |
| 50 | 1.114-00209 | [2] | SHIM A=1.90 | |
| 550 | K9001490 | [1] | ROD;TRACK(L.H) | |
| 550-1. | K9001491 | [1] | JOINT;BALL | |
| 550-2. | K9001492 | [1] | JOINT;AXIAL | |
| 550-3. | K9001493 | [1] | NUT | |
| 560 | K9001494 | [1] | ROD;TRACK(R.H) | |
| 560-1. | K9001495 | [1] | JOINT;BALL | |
| 560-2. | K9001492 | [1] | JOINT;AXIAL | |
| 560-3. | K9001493 | [1] | NUT | |
| 570 | 1.121-00022 | [2] | NUT | |
| 90 | K9001476 | [1] | BEARING;TA.ROLL. |
- Other Hot Selling Parts
1.Final drive: Travel gearbox, Travel gearbox with motor, Carrier ass'y, Sun gear shaft
2.Swing gear: Center joint ass'y, Swing gearbox, Swing motor, Gear reduction ass'y
3.Undercarriage Parts: Track roller, Track link ass'y, Idler roller, Sprocket, Spring ass'y
4.Hydraulic parts: Hydraulic pump, Main Valve, Hydraulic cylinder
5. Engine parts: Engine Ass’y, Crankshaft, Turbocharger, Fuel injector, Flywheel, Starter motor, Cooling fan, Solenoid valve
6.Electrical parts: Wiring harness, Controller, Monitor
7.Other: Cylinder Seal Kits, Fuel tank, Filter, Boom, Arm, Bucket etc.
- Packing and Delivery
Packaging Details:
1.According to orders,pack the spare parts one by one by oil paper;
2.Put them into small carton boxes one by one;
3.Put the packed small carton boxes into bigger carton boxes one by one;
4.Put the bigger carton boxes into wooden boxes if necessary especially for the shipments by sea;
5. goods is packed by oil paper and plastic bags inside;
6.using wooden package;
7.we support the custom-made demand for package.
Port: Huangpu Port.
Lead Time : Within 2 days after receiving the pay me.
Ship: Express (FedEx/DHL/TNT/UPS), air cargo, truck, by sea.
- Warranty
1. Warranty Period: 3 Months' warranty from the date of arrival. Longer period of 6 months' warranty could be offered with higher price level.
2. Warranty type: replacement of the parts that have quality problem.
3. Warranty is not valid for below s
* Cutomer give wrong information about the order
* Force Majeure
* Wrong installation and operation
* Rust because of wrong stock & maintenance
- Our service
1.OEM is available,
2.Special design can change according to your request,
3.Provide professional advice to the buyer, so bucket can work well with your excavators,
4.We choose the best material for our bucket and own experienced skills,
5.Fast delivery time and good after-sales service.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.